OME 2" Coil + M.O.R.E 1" BL
#1
JK Newbie
Thread Starter
Join Date: Mar 2009
Location: Rancho Cucamonga, CA
Posts: 30
Likes: 0
Received 0 Likes
on
0 Posts
OME 2" Coil + M.O.R.E 1" BL
I think I am going to run this set up and throw up some 35's and regear to 5.13 (auto). Is that all good? No need for break line extensions and such?
Any other issues or advice? Pretty much a mall-crawler with the occasional offroad excursion.
On a side note, how do you pronounce "LoD". I like their bumpers.
Thanks
Kevin
Any other issues or advice? Pretty much a mall-crawler with the occasional offroad excursion.
On a side note, how do you pronounce "LoD". I like their bumpers.
Thanks
Kevin
#2
JK Jedi Master
Join Date: Jan 2008
Location: Austin <--> Colorado Springs
Posts: 11,463
Likes: 0
Received 162 Likes
on
154 Posts
Which OME coils? 2door or 4door?
HD coils on a 2door will give you up around 4 inches of lift. On a 4door, somewhere between 3 and 3.5". I haven't heard of any of the OME coils actually giving 2".
Brake line brackets/new lines, trackbars, control arms, links, bumpstops, driveshafts, etc - it's all based on total lift height, with a bit of personal preference thrown in. Do a bit more research on the individual coils, not the 'generic' 2" kits that we all know give more than two inches...
HD coils on a 2door will give you up around 4 inches of lift. On a 4door, somewhere between 3 and 3.5". I haven't heard of any of the OME coils actually giving 2".
Brake line brackets/new lines, trackbars, control arms, links, bumpstops, driveshafts, etc - it's all based on total lift height, with a bit of personal preference thrown in. Do a bit more research on the individual coils, not the 'generic' 2" kits that we all know give more than two inches...