Nitro Axle Shafts from Olympus Offroad
#1
JK Enthusiast
Thread Starter
Join Date: Jan 2012
Location: Indiana
Posts: 130
Likes: 0
Received 0 Likes
on
0 Posts
Nitro Axle Shafts from Olympus Offroad
After an incident while off-road with some friends, my JK was making an AWFUL squeaking noise. I was able to track the issue down to a bent passenger side axle flange. I contacted Olympus Offroad and literally within minutes of sending an email I received a highly-detailed response that answered all of my questions, once again Olympus leads the way with their customer service. I decided to order a set of rear axle shafts. Three days later my axle shafts arrived at my door, ready to bolt on the jeep.
I found a writeup on removing the rear shafts on JK-Forum. In about 45 minutes I had both factory shafts out and the nitro shafts installed. The drivers side measures 30.79" and the passenger side measures 32.50".
After torquing all of the necessary hardware, I took the jeep for a quick spin.... NO MORE SQUEAK! I was happy that my squeak and my wallet was even happier, thanks to the great price from Olympus Offroad.
I found a writeup on removing the rear shafts on JK-Forum. In about 45 minutes I had both factory shafts out and the nitro shafts installed. The drivers side measures 30.79" and the passenger side measures 32.50".
After torquing all of the necessary hardware, I took the jeep for a quick spin.... NO MORE SQUEAK! I was happy that my squeak and my wallet was even happier, thanks to the great price from Olympus Offroad.
#6
JK Enthusiast
Thread Starter
Join Date: Jan 2012
Location: Indiana
Posts: 130
Likes: 0
Received 0 Likes
on
0 Posts
#7
JK Jedi Master
Join Date: Jan 2008
Location: Austin <--> Colorado Springs
Posts: 11,463
Likes: 0
Received 162 Likes
on
154 Posts
You didn't have to press the bearings? It just bolts right up?
Trending Topics
#8
JK Enthusiast
Thread Starter
Join Date: Jan 2012
Location: Indiana
Posts: 130
Likes: 0
Received 0 Likes
on
0 Posts
It is an option to have them pressed. They arent that much more expensive than the other brands.