Need Lift Help Before I Start
#1
JK Enthusiast
Thread Starter
Join Date: Mar 2009
Location: Parker, Colorado
Posts: 209
Likes: 0
Received 0 Likes
on
0 Posts
Need Lift Help Before I Start
First off, I used the search and did not get the info I was looking for.
I have a 2-door X (base model) Auto, and just replaced the 16" steelies for some much needed 33's.
I have a TF 2.5 BB (spacers with shock extenders) and also have springs and shocks (red ones) from a 4-door hard top tow package ready to install Sunday. I know I have to watch the drive the shaft angle being a Auto and to notch the plate on the transfer case. This is also my daily driver (my mall crawler with a hope to do some Colorado mountain fun). My question is,
Put it all on, just lift and shocks, or just the lift? Anything else i need to know?
Thanks in advance!
I have a 2-door X (base model) Auto, and just replaced the 16" steelies for some much needed 33's.
I have a TF 2.5 BB (spacers with shock extenders) and also have springs and shocks (red ones) from a 4-door hard top tow package ready to install Sunday. I know I have to watch the drive the shaft angle being a Auto and to notch the plate on the transfer case. This is also my daily driver (my mall crawler with a hope to do some Colorado mountain fun). My question is,
Put it all on, just lift and shocks, or just the lift? Anything else i need to know?
Thanks in advance!
#2
Sponsoring Manufacturer
First off, I used the search and did not get the info I was looking for.
I have a 2-door X (base model) Auto, and just replaced the 16" steelies for some much needed 33's.
I have a TF 2.5 BB (spacers with shock extenders) and also have springs and shocks (red ones) from a 4-door hard top tow package ready to install Sunday. I know I have to watch the drive the shaft angle being a Auto and to notch the plate on the transfer case. This is also my daily driver (my mall crawler with a hope to do some Colorado mountain fun). My question is,
Put it all on, just lift and shocks, or just the lift? Anything else i need to know?
Thanks in advance!
I have a 2-door X (base model) Auto, and just replaced the 16" steelies for some much needed 33's.
I have a TF 2.5 BB (spacers with shock extenders) and also have springs and shocks (red ones) from a 4-door hard top tow package ready to install Sunday. I know I have to watch the drive the shaft angle being a Auto and to notch the plate on the transfer case. This is also my daily driver (my mall crawler with a hope to do some Colorado mountain fun). My question is,
Put it all on, just lift and shocks, or just the lift? Anything else i need to know?
Thanks in advance!
#7
JK Enthusiast
Thread Starter
Join Date: Mar 2009
Location: Parker, Colorado
Posts: 209
Likes: 0
Received 0 Likes
on
0 Posts
I am rumming 285 75 16 on 16 soft 8's with 4.25 back spacing. The issue I dont think is spacers, I am more interested in what combo lift I should go with that was in my first post.
Thanks
Thanks
Trending Topics
#9
JK Jedi Master
Well then, no you don't need spacers, put it all on as TF stated, post pics when done.