Metalcloak Thread
#1433
#1434
JK Enthusiast
There was on my '09 but not on my '14. The tab is usually at about 12:00 which is where I initially set the end of the coil.
The spring was a sumbitch to turn even with the driver's side jacked up and the axle drooping.
#1435
I have done two lifts on 14's and there was a notch in the lower perch to orient the coil same as there was on my 13', the 07', (2) 09's, and a 11' I have had the coils out on.
#1436
JK Junkie
Yeah, I have to agree again. Just put a GC ARB on a 2014 Rubi X and the perch was the same as my 2013 - had the locating tab. Located at the back side (rearward side).
#1437
#1438
JK Junkie
#1439
Thought I'd post a couple pics from the weekend to tease those waiting to install their kit. Last pic took 7 Jeeps to recover the guy from what would have been a near death fall.
<img src="https://www.jk-forum.com/forums/attachment.php?attachmentid=559045"/><img src="https://www.jk-forum.com/forums/attachment.php?attachmentid=559046"/><img src="https://www.jk-forum.com/forums/attachment.php?attachmentid=559047"/><img src="https://www.jk-forum.com/forums/attachment.php?attachmentid=559048"/>
<img src="https://www.jk-forum.com/forums/attachment.php?attachmentid=559045"/><img src="https://www.jk-forum.com/forums/attachment.php?attachmentid=559046"/><img src="https://www.jk-forum.com/forums/attachment.php?attachmentid=559047"/><img src="https://www.jk-forum.com/forums/attachment.php?attachmentid=559048"/>
Cool shots man
Sent from my LG-LS980 using JK-Forum
#1440
JK Junkie