Low-cost / Free mods that should be done?
#3661
JK Junkie
Yep! I have them and absolutely love them. Worth the $20 any day...
#3662
#3663
JK Enthusiast
Join Date: Nov 2010
Location: Templeton, MA
Posts: 129
Likes: 0
Received 0 Likes
on
0 Posts
Got to reading all the stuff on here and getting great ideas. Figured I'd try out a few. Plasti-dip, grille inserts, eyes, interior. Just have fun messing around and tinkering. <img src="https://www.jk-forum.com/forums/attachment.php?attachmentid=488585"/><img src="https://www.jk-forum.com/forums/attachment.php?attachmentid=488581"/><img src="https://www.jk-forum.com/forums/attachment.php?attachmentid=488586"/>
#3665
Quadratec sells inserts that go around the head light.
http://www.quadratec.com/products/15009_5010.htm
Or I think I've heard people plasti dip over the headlight glass
http://www.quadratec.com/products/15009_5010.htm
Or I think I've heard people plasti dip over the headlight glass
#3666
JK Freak
Quadratec sells inserts that go around the head light.
http://www.quadratec.com/products/15009_5010.htm
Or I think I've heard people plasti dip over the headlight glass
#3667
JK Super Freak
Join Date: May 2013
Location: Canada
Posts: 1,054
Likes: 0
Received 0 Likes
on
0 Posts
Tbh that'll prob run on that it usually runs on headlights for some weird reason, and ya people say wet sand it, but I wouldn't on a headlight just me, I've tried it and I had no luck(not on jeep headlights) and I've used this product alot of alot of taillights and its never ran, but it always seams to for me on headlights, could be just me
Last edited by MojaveJK; 08-16-2013 at 11:17 PM.
#3668
Well,
I tried the turn signal modification with no success. I did it exactly how the instructions were stated. Cut the black wire on the side marker light, and spliced it into the 3rd white wire on the turn signal (furthest from the black).
What I got was a rapid blinking sound, with no illumination on either the turn signal or the side marker.
Should have been so simple.
Grr!
I tried the turn signal modification with no success. I did it exactly how the instructions were stated. Cut the black wire on the side marker light, and spliced it into the 3rd white wire on the turn signal (furthest from the black).
What I got was a rapid blinking sound, with no illumination on either the turn signal or the side marker.
Should have been so simple.
Grr!
#3669
Well,
I tried the turn signal modification with no success. I did it exactly how the instructions were stated. Cut the black wire on the side marker light, and spliced it into the 3rd white wire on the turn signal (furthest from the black).
What I got was a rapid blinking sound, with no illumination on either the turn signal or the side marker.
Should have been so simple.
Grr!
I tried the turn signal modification with no success. I did it exactly how the instructions were stated. Cut the black wire on the side marker light, and spliced it into the 3rd white wire on the turn signal (furthest from the black).
What I got was a rapid blinking sound, with no illumination on either the turn signal or the side marker.
Should have been so simple.
Grr!
#3670
Sorry. I posted this thinking it would show how to do mod, but just shows it works. https://www.jk-forum.com/forums/show....php?p=3620884
Sent from my SGH-T999 using Tapatalk 4
Sent from my SGH-T999 using Tapatalk 4
Last edited by BlkJeep; 08-17-2013 at 12:54 PM.