LOD Offroad 7/8" shackle pin?
#1
JK Enthusiast
Thread Starter
Join Date: Jul 2008
Location: MN
Posts: 219
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://www.jk-forum.com/forums/images/icons/icon1.gif)
I have a LOD signature shorty front bumper. I am wondering if a 7/8" pin will fit in the shackle mount holes? When I measure it, it looks like it is EXACTLY 7/8". I just want to make sure the 7/8" pin will fit before ordering a set of shackles.
#5
JK Enthusiast
Thread Starter
Join Date: Jul 2008
Location: MN
Posts: 219
Likes: 0
Received 0 Likes
on
0 Posts
Trending Topics
#8
JK Jedi Master
![Default](https://www.jk-forum.com/forums/images/icons/icon1.gif)
Just went ouside and measure my 7/8' shackle pin, it's a tiny bit smaller than an actual 7/8" , my shackle hole seems to be exactly 7/8", I have a different bumper, but it seems like you should be okay with it. Sorry ,Had a few tonight, rough day, I tend to be a smartass sometimes. But I did go out in the cold to measure a damn shackle. Yep, jeep thang!
#9
JK Freak
Join Date: Sep 2007
Location: Stephenville, TX
Posts: 629
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://www.jk-forum.com/forums/images/icons/icon1.gif)
i tried to get a 7/8" pin through my LoD SS, the pin is the right size but the threads are 1/8" wider ( 1" total).
i ended up with a smaller size and its perfect, and you have room to get the shank washers that also fit perfect and it doesnt rattle or even move without a little effort.
i ended up with a smaller size and its perfect, and you have room to get the shank washers that also fit perfect and it doesnt rattle or even move without a little effort.