Notices
Modified JK Tech Tech related bulletin board forum regarding subjects such as suspension, tires & wheels, steering, bumpers, skid plates, drive train, cages, on-board air and other useful modifications that will help improve the performance and protection of your Jeep JK Wrangler (Rubicon, Sahara, Unlimited and X) on the trail.

PLEASE DO NOT START SHOW & TELL TYPE THREADS IN THIS FORUM

Is a Load E, 10 ply tire to much for a JKU?

Thread Tools
 
Old 08-23-2017, 04:51 PM
  #1  
JK Enthusiast
Thread Starter
 
njdan's Avatar
 
Join Date: Mar 2009
Location: Jersey Shore
Posts: 379
Received 1 Like on 1 Post
Default Is a Load E, 10 ply tire to much for a JKU?

OK, I am looking to get a 305/70/17 Nitto Ridge Grappler but I am not sure if the 10 ply Load E will be to stiff. Right now I have 285/70/17 ridge Grapples in Load C and they ride great. Are there any 305's that are Load C/ 4 ply? Or any 305's that guys are running besides the Ridge Grapplers?
Old 08-23-2017, 05:10 PM
  #2  
JK Enthusiast
 
MacRubi2's Avatar
 
Join Date: Nov 2013
Location: Westminster Colorado
Posts: 120
Likes: 0
Received 1 Like on 1 Post
Default

I ran 315/70/17 in load range E and now run 37's that are a C and I can tell a deference for sure on the pavement.

These were both Pro Comp Xtreme MT2's
Old 08-23-2017, 05:28 PM
  #3  
JK Enthusiast
Thread Starter
 
njdan's Avatar
 
Join Date: Mar 2009
Location: Jersey Shore
Posts: 379
Received 1 Like on 1 Post
Default

I just put on Fox 2.0 shocks and OME springs so not sure if that would help if I went with Load E tires, just dont want it to ride like a tank and feel everything on the pavement.
Old 08-23-2017, 05:42 PM
  #4  
JK Enthusiast
 
MacRubi2's Avatar
 
Join Date: Nov 2013
Location: Westminster Colorado
Posts: 120
Likes: 0
Received 1 Like on 1 Post
Default

Originally Posted by njdan
I just put on Fox 2.0 shocks and OME springs so not sure if that would help if I went with Load E tires, just dont want it to ride like a tank and feel everything on the pavement.
I think you will be fine.

I run stiff TeraFlex springs and could definitely tell a difference.

Two of the guys I wheel with run the AEV springs in there JKUR and they ride like Caddies compared to me 😂
Old 08-23-2017, 05:46 PM
  #5  
JK Enthusiast

 
toolow262's Avatar
 
Join Date: Mar 2012
Location: Webster, NY
Posts: 303
Likes: 0
Received 0 Likes on 0 Posts
Default

I run E load range 285/75R17 Toyos on stock suspension. They are harsher than load range C but I don't find it to be unbearable at all and wouldn't hesitate to buy again. If you have someone in the area with E range see if you can take a ride. I think opinions are going to vary to much for you to make a educated decision as some will side with me and some will say never use a E range.

-Brad
Old 08-23-2017, 09:27 PM
  #6  
JK Freak
 
4x4chick's Avatar
 
Join Date: Feb 2012
Location: La Quinta California
Posts: 686
Likes: 0
Received 1 Like on 1 Post
Default

We went from 35" tires load range C (KM2) to 35" tires load range E (Nitto trail grapplers) and the difference is night and day. But at least now we don't have to worry about side wall cuts on the rocks.
Old 08-23-2017, 09:58 PM
  #7  
JK Freak

 
doc5339's Avatar
 
Join Date: Aug 2012
Location: Chapel Hill, NC
Posts: 653
Received 16 Likes on 16 Posts
Default

No worries, throw them on.

I ran "E" Range BFG Mud-Terrain T/A KM2 LT255 80 17 on my stock JKUR wheels and suspension and they were really awesome all-around.
Old 08-24-2017, 03:21 AM
  #8  
JK Enthusiast
 
pbeabout's Avatar
 
Join Date: May 2012
Location: Robinson, Illinois
Posts: 121
Likes: 0
Received 0 Likes on 0 Posts
Default

I am running that exact tire, and they are fine. Just be sure to check your tire pressure after you leave the tire shop. My shop always seems to set them around 40 to 50 psi and you will probably like them around 30 psi. You can do a chalk test to find out the sweet spot where you have the best contact patch.
Old 08-24-2017, 06:13 AM
  #9  
JK Newbie
 
Arson's Avatar
 
Join Date: Jul 2017
Location: Gulf Shores AL
Posts: 46
Likes: 0
Received 0 Likes on 0 Posts
Default

I run E rated. I drive through fields that have been bush hogged to get to trails on my farm. I like having a thicker tire, just run about 20 lbs of air in them. Nice soft ride. I also have my shocks on the softest ride possible so I can ride pretty fast through open spaces.
Old 08-24-2017, 07:34 AM
  #10  
JK Jedi
FJOTM Winner
 
TheDirtman's Avatar
 
Join Date: Oct 2010
Location: Southwest Reno, NV
Posts: 6,222
Received 366 Likes on 290 Posts
Default

Depends on what you are doing, if just driving on the road then E rated will be fine but ride a bit rougher. If you want a tire that is going to climb stuff then a C rated is a much better choice as they will wrap around stuff and give you much better traction. The E rated tire will also be heavier if that is a concern to you. Personally I would not run a E tire on a jeep.


Quick Reply: Is a Load E, 10 ply tire to much for a JKU?



All times are GMT -8. The time now is 01:31 PM.