A couple of questions:

I have the stock bumper with a Warn Winch Plate and (soon) a XRC8 winch. I want to compensate for the weight of the winch and plate and know that the 3/4" kit will do that in the front...

1) Will it level out if I do 1 3/4" spacers up front and the 3/4" in the rear?
2) Has anyone got this setup with some pics of how it looks with the stock 18" wheels and tires?

As always, thanks guys!

 

yup, it probably will.

 

ive got the 1 3/4" levelling kit with winch and winch bumper
without any spacers in the rear and im sittin about as level as i can get

 

So, you have the 1 3/4" up frront with nothing in the back - I wonder then if I just need the 3/4" kit up front since I have the plate and not a full winch bumper....? I was hoping that the 3/4" in the back with the 1 3/4" up front would give me a little lift and also level it out, but sounds like I would still end up with the rake if I did it that way.