Just had a jeep shop refuse to...
#21
JK Super Freak
Thread Starter
Pretty pumped, getting my trackbar, drag link flip, and steering stabilizer installed this Friday. Can't wait to drive my jeep again and have steering that actually somewhat reacts...driving my jeep has been pretty miserable since about a year after buying my
Jeep, once the lift got all losend up etc
Jeep, once the lift got all losend up etc
#22
I had to put stock wheels without spacers back on my Jeep while waiting for my new wheels to come in. I only drove less than a mile but my synergy drag link flipped rubbed on the wheel weight bad and slightly on the wheel itself. So I imagine with spacers you would most likely be ok.
Stock wheels:
New Method Beadlocks with 3.5" backspacing. Clear easily....
Stock wheels:
New Method Beadlocks with 3.5" backspacing. Clear easily....
#23
JK Super Freak
Thread Starter
I had to put stock wheels without spacers back on my Jeep while waiting for my new wheels to come in. I only drove less than a mile but my synergy drag link flipped rubbed on the wheel weight bad and slightly on the wheel itself. So I imagine with spacers you would most likely be ok.
Stock wheels:
New Method Beadlocks with 3.5" backspacing. Clear easily....
Stock wheels:
New Method Beadlocks with 3.5" backspacing. Clear easily....
#24
JK Freak
I installed myself and I have never in my life done anything like that before. It's super easy and there is a YouTube video too. You really can't screw it up. The alignment shop will fine tune everyhing for you anyways
#25
JK Super Freak
Thread Starter
Haven't spoiled my jeep in over 2 years not tomorrow is the day all these goodies get installed...took over an hour with UPS explaining I didn't care of the driver didn't understand it was a company not an apartment complex, that was no excuse to turn around without even walking in the front door because you didn't see a number on the package...but they came back and the final parts were delivered
1.75" synergy wheel spacers
Synergy adjustable track bar
Synergy Drag link flip kit
Synergy flip adapter (10 dollar part the for some reason don't include in the draglink flip kit, this and te spacers is what almost put a damper on my install tomorrow)
Fox ATS Steering Stabilizer
1.75" synergy wheel spacers
Synergy adjustable track bar
Synergy Drag link flip kit
Synergy flip adapter (10 dollar part the for some reason don't include in the draglink flip kit, this and te spacers is what almost put a damper on my install tomorrow)
Fox ATS Steering Stabilizer
#26
Not sure about the other stuff but the synergy track bar installation is a breeze. If your axle is way off center, it does help to jack the front end up just a hair while youre making adjustments
#27
JK Super Freak
Thread Starter