JK Wheel Spacers
#1
JK Wheel Spacers
I have a 2009 Sport X and was looking to make it look a little wider. I looked and saw wheel spacers. Are they safe to use? Will they cause parts to wear out? Any alternatives if those aren't any good?
#2
JK Jedi Master
Join Date: Jan 2008
Location: Austin <--> Colorado Springs
Posts: 11,463
Likes: 0
Received 162 Likes
on
154 Posts
The Spidertrax type of spacers are fine. Assuming you install them correctly and are willing to check them as part of regular maintenance.
The alternative is new rims with less backspace.
Spacers will not cause any more wear than rims with equal backspace.
The alternative is new rims with less backspace.
Spacers will not cause any more wear than rims with equal backspace.
#3
JK Super Freak
Join Date: Aug 2009
Location: Wildomar ca
Posts: 1,821
Likes: 0
Received 0 Likes
on
0 Posts
Never heard of spacers on a jk , did you try the search to see if anybody else ever ran them
#4
X's 2! Do not get the cheepo washer spacers. I've been running for several thousand miles. No problem.
Last edited by Ryan0260; 11-18-2013 at 05:38 PM.
#6
The spacer phenomenon comes down to proper installation and maintenance by the operator. Seat belts are unsafe as wheel spacers if not installed and utilized properly.
Sent from my DROID4 using Tapatalk
#7
Clever- kudos to you fine sir :thumb:
"Cheepo washer spacers" are perfectly acceptable so long as there is enough wheel stud for the lug nut to engage and the wheel sits flush with the mounting surface. They are prone to cracking if overtightened but that's easily avoidable.
The spacer phenomenon comes down to proper installation and maintenance by the operator. Seat belts are unsafe as wheel spacers if not installed and utilized properly.
Sent from my DROID4 using Tapatalk
"Cheepo washer spacers" are perfectly acceptable so long as there is enough wheel stud for the lug nut to engage and the wheel sits flush with the mounting surface. They are prone to cracking if overtightened but that's easily avoidable.
The spacer phenomenon comes down to proper installation and maintenance by the operator. Seat belts are unsafe as wheel spacers if not installed and utilized properly.
Sent from my DROID4 using Tapatalk
Trending Topics
#10
JK Enthusiast
Join Date: Jan 2010
Location: Houston, TX
Posts: 236
Likes: 0
Received 0 Likes
on
0 Posts
I have a 2009 JKUR, I've run bolt-on spacers for over 95,000 miles and 4 sets of tires up to 35's with no issues. Use red lok-tite when you install them and, barring some structure issue in the aluminum, or poor machining of the spacers you are good to go. I have never torque checked my spacer since I installed them almost 5 years ago. The reason for not torque checking them, as some have suggested, is to keep the integrity of the lok-tite.