Installing headers...other additions to the exhaust system?
#12
JK Freak
Thread Starter
![Default](https://www.jk-forum.com/forums/images/icons/icon1.gif)
I've made several short drives now, speeds not over 55mph. The VT sounds mellow, with a little growl at idle and when leaving the stop light. My brother and I could hardly notice it at any speed. In-cabin conversations were normal. Stereo adjustments un-needed. I don't detect any "drone", but notice some different tones when going thru the gears. By different I mean different over stock.
I'm very pleased with how it turned out. I was apprehensive about changing the exhaust. I really dislike the ricer sound and the roaring V-8 Mustangs.....oh and the obnoxious diesel trucks with the giant pipes
![gak](https://www.jk-forum.com/forums/images/smilies/icon_crazy.gif)
I can't detect any engine performance gain. I do like the way the CAI and the muffler sound at WOL. Very cool.
![Cool](https://www.jk-forum.com/forums/images/smilies/cool.png)
#13
JK Freak
Thread Starter
![Default](https://www.jk-forum.com/forums/images/icons/icon1.gif)
Please be patient. It might be a couple of weeks before I can get to the install, what with the holidays and all. ![Yup](https://www.jk-forum.com/forums/images/smilies/yup.gif)
I've looked over the engine compartment closely. I don't see any big problems, just the usual remove this to get to that sorta thing. I'm considering changing the battery tray, as others have noticed the tray does take a lot of space and could trap some heat. I might do a snorkle install (River Raider) along with the headers, we'll see.
![Yup](https://www.jk-forum.com/forums/images/smilies/yup.gif)
I've looked over the engine compartment closely. I don't see any big problems, just the usual remove this to get to that sorta thing. I'm considering changing the battery tray, as others have noticed the tray does take a lot of space and could trap some heat. I might do a snorkle install (River Raider) along with the headers, we'll see.
#14
Super Moderator
Join Date: Jun 2011
Location: Hendersonville, Tennessee
Posts: 11,043
Likes: 0
Received 83 Likes
on
75 Posts
![Default](https://www.jk-forum.com/forums/images/icons/icon1.gif)
Originally Posted by texwillys
I've made several short drives now, speeds not over 55mph. The VT sounds mellow, with a little growl at idle and when leaving the stop light. My brother and I could hardly notice it at any speed. In-cabin conversations were normal. Stereo adjustments un-needed. I don't detect any "drone", but notice some different tones when going thru the gears. By different I mean different over stock.
I'm very pleased with how it turned out. I was apprehensive about changing the exhaust. I really dislike the ricer sound and the roaring V-8 Mustangs.....oh and the obnoxious diesel trucks with the giant pipes
![gak](https://www.jk-forum.com/forums/images/smilies/icon_crazy.gif)
I can't detect any engine performance gain. I do like the way the CAI and the muffler sound at WOL. Very cool.
![Cool](https://www.jk-forum.com/forums/images/smilies/cool.png)
#15
JK Freak
Thread Starter
![Default](https://www.jk-forum.com/forums/images/icons/icon1.gif)
the header with the heat shield is for the driver side. I have ceramic coated JBA headers in my 08 with a hushpower resonator and a flowmaster cat back.
I recommend that you put a stage 8 header bolt kit when you install your headers. if you get the kit for the Jeep 4.7L v8 than you will have 4 extra bolts left over in case you drop a washer or e clip. one other thing to do is put some extra long bolts on the cat flange bolts and they double nut them so you won't loss any nuts after it goes thru a few heat cycles. one thing you will notice is that the cat flange bolts will get lose enought to spin by hand. if tighten them again, then they will get lose again in a few days. you'll just have to live with it, i haven't found a way around it. I did try and put some springs on the flanges to keep a even tension on them but I can't get strong enough springs to keep good pressure.
I recommend that you put a stage 8 header bolt kit when you install your headers. if you get the kit for the Jeep 4.7L v8 than you will have 4 extra bolts left over in case you drop a washer or e clip. one other thing to do is put some extra long bolts on the cat flange bolts and they double nut them so you won't loss any nuts after it goes thru a few heat cycles. one thing you will notice is that the cat flange bolts will get lose enought to spin by hand. if tighten them again, then they will get lose again in a few days. you'll just have to live with it, i haven't found a way around it. I did try and put some springs on the flanges to keep a even tension on them but I can't get strong enough springs to keep good pressure.
John, thanks for the advice. Do I understand that you have 2 resonators? Should I expect a significant noise level increase?
My previous experiences with headers was only in racing applications, so I wasn't concerned about the noise.
#16
JK Freak
Thread Starter
![Default](https://www.jk-forum.com/forums/images/icons/icon1.gif)
Also, I'm still running my soft top, so I can hear the muffler better than with a hard top. If you are running the hard top you probably won't even hear this muffler except at WOL.
#17
Super Moderator
Join Date: Jun 2011
Location: Hendersonville, Tennessee
Posts: 11,043
Likes: 0
Received 83 Likes
on
75 Posts
![Default](https://www.jk-forum.com/forums/images/icons/icon1.gif)
Originally Posted by texwillys
Ryan, I was at a stop light this morning next to a Chevy truck with the usual dual exhaust and turbo mufflers. I couldn't even hear my Jeep.
Also, I'm still running my soft top, so I can hear the muffler better than with a hard top. If you are running the hard top you probably won't even hear this muffler except at WOL.
#18
![Default](https://www.jk-forum.com/forums/images/icons/icon1.gif)
If your going to try to run true duals all the way back you will. I'm curious to see how that turns out. I'm running Ripp Headers and with my setup things seemed cramped. I'm sure someone can figure out a way to keep it true dual but your talking two resonators and two mufflers. To keep it true in a manner of speaking. Just doesn't seem like there is enough room under there. My opinion.
#19
![Default](https://www.jk-forum.com/forums/images/icons/icon1.gif)
I've made several short drives now, speeds not over 55mph. The VT sounds mellow, with a little growl at idle and when leaving the stop light. My brother and I could hardly notice it at any speed. In-cabin conversations were normal. Stereo adjustments un-needed. I don't detect any "drone", but notice some different tones when going thru the gears. By different I mean different over stock.
I'm very pleased with how it turned out. I was apprehensive about changing the exhaust. I really dislike the ricer sound and the roaring V-8 Mustangs.....oh and the obnoxious diesel trucks with the giant pipes![gak](https://www.jk-forum.com/forums/images/smilies/icon_crazy.gif)
I can't detect any engine performance gain. I do like the way the CAI and the muffler sound at WOL. Very cool.![Cool](https://www.jk-forum.com/forums/images/smilies/cool.png)
I'm very pleased with how it turned out. I was apprehensive about changing the exhaust. I really dislike the ricer sound and the roaring V-8 Mustangs.....oh and the obnoxious diesel trucks with the giant pipes
![gak](https://www.jk-forum.com/forums/images/smilies/icon_crazy.gif)
I can't detect any engine performance gain. I do like the way the CAI and the muffler sound at WOL. Very cool.
![Cool](https://www.jk-forum.com/forums/images/smilies/cool.png)
Very cool! You nailed it in your description, not over the top, you now hear your exhaust but it isn't a bad thing. And as you mentioned you can hear your stereo!
#20
JK Newbie
Join Date: Nov 2011
Location: El Paso, Texas
Posts: 16
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://www.jk-forum.com/forums/images/icons/icon1.gif)
This wont void any warranty that the jeep has will it? I have seen posts about jeeps getting knocked for being lifted even mild lifts, i guess chrysler is picky on what we can do to our jeeps? And a second question is anyone running flowmaster 40 or 44's on the jeep 3.8-3.6pentastar? if so hows the sound on it with headers ![Smile](https://www.jk-forum.com/forums/images/smilies/smile.png)
![beer](https://www.jk-forum.com/forums/images/smilies/beermug.gif)
![beer](https://www.jk-forum.com/forums/images/smilies/beermug.gif)
![Smile](https://www.jk-forum.com/forums/images/smilies/smile.png)
![beer](https://www.jk-forum.com/forums/images/smilies/beermug.gif)
![beer](https://www.jk-forum.com/forums/images/smilies/beermug.gif)
![Thumb](https://www.jk-forum.com/forums/images/smilies/thumb.gif)