Notices
Modified JK Tech Tech related bulletin board forum regarding subjects such as suspension, tires & wheels, steering, bumpers, skid plates, drive train, cages, on-board air and other useful modifications that will help improve the performance and protection of your Jeep JK Wrangler (Rubicon, Sahara, Unlimited and X) on the trail.

PLEASE DO NOT START SHOW & TELL TYPE THREADS IN THIS FORUM

Installed 2015 10A Rubicon Wheels on a 2009 and...

Thread Tools
 
Old 02-11-2016 | 08:54 PM
  #1  
matt852's Avatar
Thread Starter
JK Junkie
 
Joined: Mar 2009
Posts: 2,368
Likes: 0
From: Scottsdale, AZ
Default Installed 2015 10A Rubicon Wheels on a 2009 and...

Now the TPMS light keeps going off. I am assuming the wheel sensors between the 2009 and 2015s are different. My question is I am running these tires at 37 psi will having the TPMS sensor triggered cause any other problems? I would rather not spend another 300 to get pressure sensors for all the wheels installed when I am getting new tires in 1 year and 4 months.

Thanks
Old 02-11-2016 | 09:08 PM
  #2  
ronjenx's Avatar
JK Jedi Master
 
Joined: Feb 2008
Posts: 12,882
Likes: 172
From: Maine
Default

The radio frequency is different for the 2015 compared to your 2009.

Having the warning illuminated will have no effect on anything else.

I bought 5 new sensors for my 2008 for about $39 each. Had them installed at no extra cost when I bought new tires.

Last edited by ronjenx; 02-11-2016 at 09:11 PM.



Quick Reply: Installed 2015 10A Rubicon Wheels on a 2009 and...



All times are GMT -8. The time now is 10:15 AM.