PAWrangler

Ok! I currently have 3.21's and am running 35's with a 6 speed manual. I want to regear to 4.88's but I'm confused about the dana 30 carrier. I know I need to get one for a 3.73 and larger but where do I get one?! What are my options on the dana 30. Somebody please help me!

nthinuf

A new carrier is less than $100, and you can get them pretty much anywhere. Your local dealership, any 4x4 or drivetrain shop can order them, any of the site sponsors can hook you up.

Or, if you are considering a front locker or limited, (arb, elocker, truetrac, etc) that will be new carrier.

PAWrangler

Do the spider gears from the 3.21 carrier get reused in the 3.73 carrier?

LynDi

G2 gears will fit 4.88 into the Dana 30. Mine was regeared 3 years ago, no issues.

Jeter

buy a locker like the detroit that replaces your carrier, or an electric or air locker. You'll be glad you did if you wheel your vehicle.

booberj

David with Northridge can set you up... he just sent me a quote for everything you need to regear from 3.21 to 4.88... 550 for the kit and 75 for the carrier... Just ask Dave, he was quick with a response... includes free shipping as well

dmhines

No ... different Pin diameter ... Have your shop install a Loaded Dana 30 3.73+ carrier ...