Team313

2013 Rubicon JKU, and I need a lift kit, I have gotten way to much advice from TJ buddies, so help, I would like to run 35's with my stock rims. AEV, Icon, TF. What do you think.
Thank You

familytime

TF 2.5

wharthog69

This. Or the Metalcloak system if you have some coin

afpilot82

Please, please spend some time searching the forum. This has been gone over to death. Everyone is going to tell you their lift is best...so in that spirit, I recommend Teraflex!

OH9JK

TeraFlex makes a good kit at an affordable price....dont forget wheel spacers if you want to run 35's on stock wheels.

Team313

I've been researching and reading on here since May! Maybe I should of asked what not to buy!!

TURTLECON

What's your budget? Let's start there.

Team313

$3000 for lift and labor

Maertz

ha this x2.

im personally a rock krawler fan, but am running a lift i made my self using rock krawler coils. Imo most kits are pretty comparable in that range.. Personally id do the lift yourself and save a ton of money and possibly get a driveshaft with the savings?

Rutgyr

With that budget you can get a good spring/ca setup along with shocks. If you have any mechanical inclination or have any buddies that do, do the install yourself over a weekend or less. The Evo, RK, TF, etc are all great kits along with some Bilstein shocks. I haven't used them but TF spings run a little tall and are a bit on the firmer side of a ride, the Evo kits is supposed to be really plush. I run the RK 3.5 mid kit and and like it a lot, its a bit firm but I think its more the Fox shocks than the springs in my case.