HELP! Massive Tire Rub on Rear JK Body Panel!
#1
JK Super Freak
Thread Starter
Join Date: Nov 2007
Location: Ft. Worth (ALEDO) , Texas
Posts: 1,094
Likes: 0
Received 0 Likes
on
0 Posts
HELP! Massive Tire Rub on Rear JK Body Panel!
I was going to have the guy thats installing my sliders just fold it back but maybe theres is something bent out of shape. Don't know if any of ya'll have had this problem but the rear center corners of my Jeep have been really rubbing my Tires! Here are some pics, don't know if ya'll can tell what I'm talking about but I'm pointing to it in one. Thanks
Last edited by Ewok; 09-07-2008 at 06:37 PM.
#3
JK Super Freak
I was going to have the guy thats installing my sliders just cut it off but maybe theres is something bent out of shape. Don't know if any of ya'll have had this problem but the rear center corners of my Jeep have been really rubbing my Tires! Here are some pics, don't know if ya'll can tell what I'm talking about but I'm pointing to it in one. Thanks
OK
It LOOKS like your pinch seam is what you are concerned about (The pics are a bit hard to see clearly...)
Don't (DON'T) have it cut off.
DO have it folded (FOLDED) over, onto itself, out of the way, say with a BFH, etc.
Sigh.
#4
JK Super Freak
Thread Starter
Join Date: Nov 2007
Location: Ft. Worth (ALEDO) , Texas
Posts: 1,094
Likes: 0
Received 0 Likes
on
0 Posts
Having it fold was also A possibilty. Thanks for the info! Here is a better pic to see where I applying this to! BTW, NOT GETTING CUT NOW!
Lack of tools, and I dont believe in myself to drill into my Jeep!
Lack of tools, and I dont believe in myself to drill into my Jeep!
Last edited by Ewok; 09-07-2008 at 06:48 PM.
#6
JK Enthusiast
Join Date: Apr 2008
Location: Raeford, NC
Posts: 166
Likes: 0
Received 0 Likes
on
0 Posts
"BFH" .....I mean, ahem.....what he said.
#7
JK Super Freak
Thread Starter
Join Date: Nov 2007
Location: Ft. Worth (ALEDO) , Texas
Posts: 1,094
Likes: 0
Received 0 Likes
on
0 Posts
I understand BF but H maybe Hammer....
I think if it was treated correctly after being hacked it would be fine! Maybe I'm just dumb
I think if it was treated correctly after being hacked it would be fine! Maybe I'm just dumb
Last edited by Ewok; 09-07-2008 at 06:47 PM.
Trending Topics
#8
JK Freak
Join Date: Jun 2008
Location: Corpus Christi, TX
Posts: 528
Likes: 0
Received 0 Likes
on
0 Posts
I cut mine with a dremmel tool, painted with touch up paint to match, and then sealed with some silicone (there is an opening when it is cut). It's been like that for a year now. I only cut a small section off at an angle though. I don't think I wold have tried to use a hammer to beat it in.
#10
JK Super Freak
Thread Starter
Join Date: Nov 2007
Location: Ft. Worth (ALEDO) , Texas
Posts: 1,094
Likes: 0
Received 0 Likes
on
0 Posts
I think if it was cut at an angle, following the fender it would be fine. Treat it, fill in the gap, and paint to match. Plus it will be covered up by my PJ Sliders.
This is getting steamy!
This is getting steamy!