Help with engine.
#1
JK Enthusiast
Thread Starter
Join Date: Jul 2008
Location: Hazlet, nj
Posts: 363
Likes: 0
Received 0 Likes
on
0 Posts
Help with engine.
What can i do that wont break the bank to help with uphill driving. No matter the incline i have to downshift. Even on the highway. I have a 4' lift with 35x12.50 20's. Yes i know 20's. lets get past that.
Can i get some info on what people did to help this? Without gears?
Can i get some info on what people did to help this? Without gears?
#4
JK Super Freak
Gears will give you the best bang for the buck. If you try and do a super chip, CAI, exhaust combo, you may go up 10hp, but it will cost you almost as much as gears and not nearly as effective.
#5
There is nothing you can do short of regearing that will give you what you're looking for. I suppoes you could go with a good exhaust,headers, intake, programmer and all....but by the time you spend that chunk, you couldda regeared. It's likely that all that other stuff will not have even close to the same benefits as regearing. Save your money and regear. 5.13s will rock.
#6
JK Freak
Join Date: Oct 2007
Location: Hangin in the sunshine state....staging forum..
Posts: 943
Likes: 0
Received 2 Likes
on
2 Posts
gears are the only thing that is truely going to help you, or maybe the new superchips programmer, from what I've read it seems it really does give better noticeable power, but thats 330 that could be put towards gears
Trending Topics
#8
JK Enthusiast
Thread Starter
Join Date: Jul 2008
Location: Hazlet, nj
Posts: 363
Likes: 0
Received 0 Likes
on
0 Posts
now the cost isnt the thing with gears correct? its the install? finding a place to do that is good also? Can any NJ guys help me out? prices and places that can do it without any problems
#9
JK Junkie
Join Date: Oct 2008
Location: Fort St John B.C.
Posts: 2,008
Likes: 0
Received 0 Likes
on
0 Posts
I really need to regear as well. I am wanting to go 5.13's but the price of the labour is through the roof.
I have alot of tools and I am very mechanicly incline and am willing to take on most any project but gears are just one I don't know about and have been hesitent... is there a write-up on how to change gears to help guide me along?
I have alot of tools and I am very mechanicly incline and am willing to take on most any project but gears are just one I don't know about and have been hesitent... is there a write-up on how to change gears to help guide me along?
#10
JK Freak
Join Date: Oct 2007
Location: Hangin in the sunshine state....staging forum..
Posts: 943
Likes: 0
Received 2 Likes
on
2 Posts
good ol NJ it aint going to be cheap thats for sure, OK4wd I think charges about 1700, could try Krazy House Customs in Monmouth Junction, I know NJ jeep org was holding some stuff there and they do some pretty sick work. Cant think of any other shops right now, stay away from Kryptonite in NNJ thats for sure. You could try pm'ing njjeepthing he might know of others or nangulator he's in pa