When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Modified JK TechTech related bulletin board forum regarding subjects such as suspension, tires & wheels, steering, bumpers, skid plates, drive train, cages, on-board air and other useful modifications that will help improve the performance and protection of your Jeep JK Wrangler (Rubicon, Sahara, Unlimited and X) on the trail.
PLEASE DO NOT START SHOW & TELL TYPE THREADS IN THIS FORUM
Put the front Dana 30 together today and have adjusted pinion depth several times. This pattern is the best I have been able to get. Backlash is at .008 to .009 when I check on multiple places around the ring gear.
The drive side is centered pretty good between the heel and toe but is up higher towards the face. I can tighten up the backlash some to make the gears mesh a little deeper.
The coast side is out towards the heel but not running off the edge.
09-26-2020, 04:40 PM
Gear Pattern-Front Axle
