Front Spacer only issues
#1
JK Newbie
Thread Starter
Join Date: Dec 2008
Location: Lake Charles, Louisiana
Posts: 29
Likes: 0
Received 0 Likes
on
0 Posts
Front Spacer only issues
Considering installing 1 3/4" front coil spacers only on my 2 door Rubicon. This looks like it would level the stance out. Is there any issues or problems I should be aware of if I go this route?
#2
JK Enthusiast
Join Date: Sep 2008
Location: Quad Cities - Iowa
Posts: 272
Likes: 0
Received 0 Likes
on
0 Posts
1.75" in front might be a little too much... I have a 2dr Rubi with 1.75" front and 1" rear and it sits pretty much level...
I did not add bumpstop spacers or longer shocks - no problems.
I did not add bumpstop spacers or longer shocks - no problems.
#3
granted mine is an X but I just installed 1 3/4" spacers up front yesterday and was planning on just staying with that but it ended up being a little too high in the front and so i added the rear 1 3/4" spacer and I still have the rake. I might swap out the rear for a 1" like 08rubijk said. that should level her out. The front took like 45min to an hour, not hard what so ever.
#5
JK Super Freak
Join Date: Sep 2007
Location: Odenville, AL
Posts: 1,884
Likes: 0
Received 0 Likes
on
0 Posts
yeah 1-3/4" might be a bit too much....but I do have some for sale if you're interested!
https://www.jk-forum.com/forums/jk-suspension-112/1-3-4-front-coil-spacers-68837/
https://www.jk-forum.com/forums/jk-suspension-112/1-3-4-front-coil-spacers-68837/
#7
Correct. I chose the 1" rather than the 3/4" spacer because I plan on installing an aftermarket front stubby bumper. Probably will be going with the shrockworks stubby unless something better comes along...
Trending Topics
#8
JK Freak
Join Date: Jun 2008
Location: Great state of Arizona
Posts: 812
Likes: 0
Received 0 Likes
on
0 Posts
granted mine is an X but I just installed 1 3/4" spacers up front yesterday and was planning on just staying with that but it ended up being a little too high in the front and so i added the rear 1 3/4" spacer and I still have the rake. I might swap out the rear for a 1" like 08rubijk said. that should level her out. The front took like 45min to an hour, not hard what so ever.
#10
JK Enthusiast
Join Date: Feb 2008
Location: Arlington, VA
Posts: 168
Likes: 0
Received 0 Likes
on
0 Posts
3/4" Spacer
I just did the 3/4" up front and left the factory isolator in and it is perfect. I have the stock bumper with a winch plate (no winch yet). With the weight of a winch on the front it will be perfectly level. Here are some shots and a link to the write up:
https://www.jk-forum.com/forums/jk-write-ups-39/installing-%BE%94-leveling-kit-hella-500ffs-custom-reverse-lights-69792/
https://www.jk-forum.com/forums/jk-write-ups-39/installing-%BE%94-leveling-kit-hella-500ffs-custom-reverse-lights-69792/