Which front drive shaft?
#1
JK Enthusiast
Thread Starter
Which front drive shaft?
So it finally happened, my stock front driveshaft broke and it's time for a new one. There's quite a few options out there (Adams, Currie, Tera-flex, Coast, J.E. Reel, etc...). Also, 1310 or 1350 and with or without transfer case yoke and pinion? Any real world feedback is appreciated.
Oh yeah, I have a 2014 JK 4 door with the AEV 4.5 lift on 37" Nittos and running 4.88 gears.
Thanks
Oh yeah, I have a 2014 JK 4 door with the AEV 4.5 lift on 37" Nittos and running 4.88 gears.
Thanks
#7
JK Jedi
I replaced my front with an Adams......good quality and reasonable cost. Ordered it on a Monday, delivered that same Friday. I've been happy for 8 months now. When the time comes I'll order a replacement for the rear from them as well.
Trending Topics
#8
JK Jedi
Dana Spicer. http://www2.dana.com/pdf/PERF-JPDS-12015.pdf
I had a large drivetrain shop who handles several high end names tell me this was the best balanced shaft they have seen. Mine is smooth as silk at 80-90mph and every speed inbtween all day long. Panhead5 who posts here handles driveshaft issues in a large dealership in Ohio also has one and he says the same thing. I got mine shipped from OK4wd.com for 420. One other nice thing is while the joints have zerks and easy to grease the centerball is sealed so no having to deal with that like on many of them.
I had a large drivetrain shop who handles several high end names tell me this was the best balanced shaft they have seen. Mine is smooth as silk at 80-90mph and every speed inbtween all day long. Panhead5 who posts here handles driveshaft issues in a large dealership in Ohio also has one and he says the same thing. I got mine shipped from OK4wd.com for 420. One other nice thing is while the joints have zerks and easy to grease the centerball is sealed so no having to deal with that like on many of them.
#9
JK Enthusiast
Thread Starter
#10
JK Enthusiast
Join Date: Mar 2012
Location: springboro, ohio
Posts: 162
Likes: 0
Received 0 Likes
on
0 Posts
So it finally happened, my stock front driveshaft broke and it's time for a new one. There's quite a few options out there (Adams, Currie, Tera-flex, Coast, J.E. Reel, etc...). Also, 1310 or 1350 and with or without transfer case yoke and pinion? Any real world feedback is appreciated.
Oh yeah, I have a 2014 JK 4 door with the AEV 4.5 lift on 37" Nittos and running 4.88 gears.
Thanks
Oh yeah, I have a 2014 JK 4 door with the AEV 4.5 lift on 37" Nittos and running 4.88 gears.
Thanks