Fishing
#11
Thread Starter
JK Freak
Joined: Jan 2008
Posts: 584
Likes: 1
From: Minnetonka, MN
This is what I have so far.
10'x4" PVC $8.27 not schedule 40 it's to heavy, head but
10'x3/4" PVC $1.56
4 - 3/4" cap s $1.40
2 - 4" caps $2.26
PVC cement 4oz $3.49
Total $16.98 + tax MN is 6.5%
I have a 4 door JK, I'll see if my dealer will let me mesure up a 2 door.
It should hold 4 rods per tube with grooves for the real posts.
It will connect to the overhead cage inside the jeep with zip ties.
This will have 2 tubes about 4'-8'' long, should work with beach rods
I'll use the 3/4'' PVC to join the 2 * 4''x4'-8'' PVC together in 3-4 places.
------- <-------------------------3/4''
( ) ( ) <--------4"
sam
10'x4" PVC $8.27 not schedule 40 it's to heavy, head but
10'x3/4" PVC $1.56
4 - 3/4" cap s $1.40
2 - 4" caps $2.26
PVC cement 4oz $3.49
Total $16.98 + tax MN is 6.5%
I have a 4 door JK, I'll see if my dealer will let me mesure up a 2 door.
It should hold 4 rods per tube with grooves for the real posts.
It will connect to the overhead cage inside the jeep with zip ties.
This will have 2 tubes about 4'-8'' long, should work with beach rods
I'll use the 3/4'' PVC to join the 2 * 4''x4'-8'' PVC together in 3-4 places.
------- <-------------------------3/4''
( ) ( ) <--------4"
sam
Last edited by mcds99; 02-12-2008 at 06:09 PM.
#12
if you have a hard top.
step 1. buy 5 4 inch strips of velcro
2. stick them at even increments (one in front of rod and the middle more toward the end and the last one on the handle
3. put rod there
4. velcro to car.
5 have fun
step 1. buy 5 4 inch strips of velcro
2. stick them at even increments (one in front of rod and the middle more toward the end and the last one on the handle
3. put rod there
4. velcro to car.
5 have fun