Feedback on my path to 37's
#51
#53
JK Junkie
I went old school with a 5 gallon metal Jerry Can on my Ace back bumper!
#55
JK Super Freak
Thread Starter
Join Date: Feb 2012
Location: Denver, CO
Posts: 1,840
Likes: 0
Received 0 Likes
on
0 Posts
It's been a while since i updated, and I don't need to post up for personal gratification but I'm sure there are some who may benefit.
I needed to add bumpstops obviously
I also trimmed fenders but I posted pics of that.
Since the currie arms moved my axle back and rotated it, the bumpstops I was adding weren't aligned.
So I drilled a new hole and mounted it with one bolt Instead of 2, about 1" forward.
Sorry, if I didn't mention, this is rear axle I'm talking about.
You can see with this bumpstop extension, and cut fenders, lightly trimmed pinch, the rear is doing quite well.
I needed to add bumpstops obviously
I also trimmed fenders but I posted pics of that.
Since the currie arms moved my axle back and rotated it, the bumpstops I was adding weren't aligned.
So I drilled a new hole and mounted it with one bolt Instead of 2, about 1" forward.
Sorry, if I didn't mention, this is rear axle I'm talking about.
You can see with this bumpstop extension, and cut fenders, lightly trimmed pinch, the rear is doing quite well.