Do you have a write up? This rocks

 

Anything to help out

Sent from my DROID4 using Tapatalk 4

 

Rubi locker override switch!

 

I disconnected the springs in the rear seat headrests. They stay down for a better rear view. When someone is in the back I can manually flip them up and they stay in place until I lower them.

 

No I don't but it was really easy. I used the factory wiring and factory switch. I used some holes in the bumper and frame and a few high strength zip ties to hold them on. I will probably make a metal bracket later but the zip ties seem to be working fine.

 

Mirror relocation brackets, because without them, I'd have to leave my doors on.

 

False

 

Holes drilled in stock mirrors for drainage. Garage door opener in drivers A pillar.
Tape around door latches to keep doors from rattling.
Ground wire from battery to alternator bolt so I can start my JKU!

 

Cops in my area suck. I can't get away with anything.

 

What's the drilled holes in factory mirrors?

Sent from my free Obama iPhone using JK-Forum