OR fab tire carrier rusting!!
#1
JK Super Freak
Thread Starter
Join Date: Oct 2010
Location: Flowery Branch, GA
Posts: 1,433
Likes: 0
Received 0 Likes
on
0 Posts
I Just installed this carrier last week and I'm getting signs of surface rust already. And it's on the completely powdercoated pieces! The hinge mounting bracket has some on it, the swing arm has some, and the landing block is starting to get it. What gives?!
Oh and another thing is the latch no longer matches up with the landing block. I had it almost perfect, then one day I open it up and it droops down below the landing block. Now it's a PITA to get it latched correctly.
I love this carrier, but I'm a little disappointed in the rust appearing so quickly, and the latch issues. I also think the instructions could have been A LOT better than what they were.
Oh and another thing is the latch no longer matches up with the landing block. I had it almost perfect, then one day I open it up and it droops down below the landing block. Now it's a PITA to get it latched correctly.
I love this carrier, but I'm a little disappointed in the rust appearing so quickly, and the latch issues. I also think the instructions could have been A LOT better than what they were.
Last edited by JK.nick; 06-23-2011 at 08:11 AM.
#3
JK Super Freak
Thread Starter
Join Date: Oct 2010
Location: Flowery Branch, GA
Posts: 1,433
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Eagle78
I installed mine yesterday, I will keep an eye on surface rust.. Looks completely podercoated
#4
JK Newbie
Join Date: Oct 2010
Location: "THE MILL",Ga
Posts: 27
Likes: 0
Received 0 Likes
on
0 Posts
Mine is a bit older and I have signs as well. Nothing a little touch-up paint can't take care of. As for matching up, mine works fine-with or without my jerry cans full.
#5
I Just installed this carrier last week and I'm getting signs of surface rust already. And it's on the completely powdercoated pieces! The hinge mounting bracket has some on it, the swing arm has some, and the landing block is starting to get it. What gives?!
Oh and another thing is the latch no longer matches up with the landing block. I had it almost perfect, then one day I open it up and it droops down below the landing block. Now it's a PITA to get it latched correctly.
I love this carrier, but I'm a little disappointed in the rust appearing so quickly, and the latch issues. I also think the instructions could have been A LOT better than what they were.
Oh and another thing is the latch no longer matches up with the landing block. I had it almost perfect, then one day I open it up and it droops down below the landing block. Now it's a PITA to get it latched correctly.
I love this carrier, but I'm a little disappointed in the rust appearing so quickly, and the latch issues. I also think the instructions could have been A LOT better than what they were.
#6
JK Super Freak
Thread Starter
Join Date: Oct 2010
Location: Flowery Branch, GA
Posts: 1,433
Likes: 0
Received 0 Likes
on
0 Posts
I knew rust would appear eventually, just not after a few days of having it installed
And the instructions on YouTube are very bland, more of a quick run down of the install. Nothing too helpful actually.
And the instructions on YouTube are very bland, more of a quick run down of the install. Nothing too helpful actually.
#7
JK Super Freak
Join Date: Nov 2010
Location: East Stroudsburg, PA
Posts: 1,053
Likes: 0
Received 0 Likes
on
0 Posts
I've had mine on for several weeks. There is alittle surface rust on the bolt holes on the back of the carrier where there was no powder coat. I used a Q-tip with some rustoleum, fixed it right up. As for the contact block..you have metal on metal, the powder coat will wear and you will get some exposed metal. I had some slight on the hinge but a little light oil will helped that.
I lined mine up perfectly, sounds like you might not of had your hinges bolts tight enough, mine sags slightly with the tire on it when it is open, but it is slight. I can bring it to the landing block, latch the cam bolt and it pulls right into place.
I'd call them with any questions, their customer service is awesome and I'm sure they will offer any help or answers they can
I lined mine up perfectly, sounds like you might not of had your hinges bolts tight enough, mine sags slightly with the tire on it when it is open, but it is slight. I can bring it to the landing block, latch the cam bolt and it pulls right into place.
I'd call them with any questions, their customer service is awesome and I'm sure they will offer any help or answers they can
Trending Topics
#8
JK Freak
Pictures would be good so we can see what you mean on the rust. I've had mine for 6 months and have zero issues. It's been through tons of rain as well.
About the landing block, you need to reset your preload, it sounds like you didn't tighten everything down enough and now it's sagging because the weight of your tire. Can't really blame them for not doing it 100% right. You REALLY need to crank them down. I've got a 100lb tire and have no problems. Even run dual jerry cans and my preload never changes.
Either way, contact Yates through the forum here or give them a call. Customer service is tops!
About the landing block, you need to reset your preload, it sounds like you didn't tighten everything down enough and now it's sagging because the weight of your tire. Can't really blame them for not doing it 100% right. You REALLY need to crank them down. I've got a 100lb tire and have no problems. Even run dual jerry cans and my preload never changes.
Either way, contact Yates through the forum here or give them a call. Customer service is tops!
Last edited by Sharkey; 06-23-2011 at 08:43 PM. Reason: Competing forum reference