OR-Fab tire carrier
#1
JK Enthusiast
Thread Starter
Join Date: Jun 2011
Location: Atlanta, GA
Posts: 123
Likes: 0
Received 0 Likes
on
0 Posts
#2
JK Jedi
If you can lock it, and its snug, then you're fine. You'll find it tends to droop over time (or added weight like a hi-lift, rotopax cans, etc) and you'll have to tighten the bolts again.
Trending Topics
#8
JK Jedi
Here's mine. I freakin' love it! Gives me room to carry a 35" tire, rotopax, hilift jack, and other crap. I'm relocating my license plate to the t-bar soon.
In the 3rd pic you can see how with a lot of weight over time the carrier tends to drop. Usually after re-tightening the hinge bolts it'll sit flush with the catch again.
In the 3rd pic you can see how with a lot of weight over time the carrier tends to drop. Usually after re-tightening the hinge bolts it'll sit flush with the catch again.
#9
JK Enthusiast
Thread Starter
Join Date: Jun 2011
Location: Atlanta, GA
Posts: 123
Likes: 0
Received 0 Likes
on
0 Posts
Looks good man. So what Im saying, do you adjust yours so it lines up perfect or just pretty close and then let the block either pick up or pull it down when it's latched.