OR FAB Rocker Panel Rails (part number 84307)
#1
JK Freak
Thread Starter
Join Date: Apr 2009
Location: Westchester, NY
Posts: 579
Likes: 0
Received 0 Likes
on
0 Posts
OR FAB Rocker Panel Rails (part number 84307)
Looking into getting a set of these. Hoping to get some details from the community faithful here....
These are offered in either "wrinkle black" or "bike black". Does anyone know what the difference is? got pics?
Also, looking to find out if i can use these for a jack/lift point. Anyone know if the body will hold up with these attached?
And finally, price. Our favorite sponsors have them listed as:
4wd: $579
qtec: $503
northridge: $503
I found them on a non-sponsor (4wheelonline-dot-com) site for $442. Any of our sponsors wanna chime in here and offer me this lower price??
These are offered in either "wrinkle black" or "bike black". Does anyone know what the difference is? got pics?
Also, looking to find out if i can use these for a jack/lift point. Anyone know if the body will hold up with these attached?
And finally, price. Our favorite sponsors have them listed as:
4wd: $579
qtec: $503
northridge: $503
I found them on a non-sponsor (4wheelonline-dot-com) site for $442. Any of our sponsors wanna chime in here and offer me this lower price??
#2
JK Super Freak
Join Date: Mar 2010
Location: Santa Clara, CA
Posts: 1,299
Likes: 0
Received 0 Likes
on
0 Posts
U may wait a wile for one of the vendors to reply, if I was u I would
Just give them a call and ask. It's been my experience that if
U call northridge has some good prices
Just give them a call and ask. It's been my experience that if
U call northridge has some good prices
#4
Just installed mine! They are really strong!! I took my floor jack to see what they could do, i jacked the drivers side off the ground. both tires where in the air. Install was really easy. Just my I did get the wrinkle ones almost like a matte black. The Bike black is like a glossy black i think
I LOVE OR-Fab products!
.
I LOVE OR-Fab products!
.
#5
JK Freak
Thread Starter
Join Date: Apr 2009
Location: Westchester, NY
Posts: 579
Likes: 0
Received 0 Likes
on
0 Posts
Just installed mine! They are really strong!! I took my floor jack to see what they could do, i jacked the drivers side off the ground. both tires where in the air. Install was really easy. Just my I did get the wrinkle ones almost like a matte black. The Bike black is like a glossy black i think
I LOVE OR-Fab products!
Attachment 142905Attachment 142906Attachment 142907Attachment 142908.
I LOVE OR-Fab products!
Attachment 142905Attachment 142906Attachment 142907Attachment 142908.
Trending Topics
#8
JK Freak
I have these and flipping LOVE them. Wrinkle black is flat powder coated black with a slight rough texture, bike black is shiny black.
No issues when jacking from them, they are secured VERY WELL and will be great if you need to use them.
They are really mounted to the frame with I think 3 or 4 bolts which is the real strength behind them, as well as attaching to the pinch seem.
No issues when jacking from them, they are secured VERY WELL and will be great if you need to use them.
They are really mounted to the frame with I think 3 or 4 bolts which is the real strength behind them, as well as attaching to the pinch seem.
#9
JK Super Freak
I have seen the wrinkle black and the bike black. The wrinkle black is the more standard semi flat with a texture. The bike black is smooth and shiny. The bike black definitely is not my taste.