Electrical Distribution Panel?
#1
JK Enthusiast
Thread Starter
Electrical Distribution Panel?
I can figure things out however I am not that knowledgeable about things of this nature. So doing a little research here before I start hooking electronic devices up.
I have no idea if such an item exist however with lights, CB radios, winch’s and other items being installed in our JK’s is there such a thing where you have one connection to the battery and a panel to connect your electronic accessories?
** Moderator: Please move this post to "JK Electrical, Lighting & Sound Systems"
I have no idea if such an item exist however with lights, CB radios, winch’s and other items being installed in our JK’s is there such a thing where you have one connection to the battery and a panel to connect your electronic accessories?
** Moderator: Please move this post to "JK Electrical, Lighting & Sound Systems"
Last edited by BLACKJacK; 11-05-2013 at 01:17 PM. Reason: Request to move post
#3
#6
JK Super Freak
The Spod is really nice. I want one bad enough that I am adding electrical accessories to my JK just so I can say I "need" one.
I think I need serious professional help. Like a check-up from the neck-up.
I think I need serious professional help. Like a check-up from the neck-up.
#7
JK Enthusiast
I have this fuse panel (The large one) with (2) 7 conductor trailer wires going behind the glovebox. this gives me 7 independently fused power and ground feeds. Most of my lights etc are integrated with factory controls and I hate extra switches.
Before the fuse box I have a circuit breaker for quick disconnect of all accessories so i don't have to pull all the fuses. The entire assembly fits perfectly on top on the fuse box cover.
Before the fuse box I have a circuit breaker for quick disconnect of all accessories so i don't have to pull all the fuses. The entire assembly fits perfectly on top on the fuse box cover.
Trending Topics
#8
Had an sPod and liked it a lot... due to some changes, I sold it and installed an Auto Rod Controls switch panel.... this is the shit!
Basically a waterproof sPod with some programmability.
It has options for 4/8/12 switches... I have the 12 and it was less than the sPod.
The sPod will look like it came from the factory, John did a good job in getting it looking right... the ARC model I have will look like shit inside of your rig. Your call... looks or function.
Basically a waterproof sPod with some programmability.
It has options for 4/8/12 switches... I have the 12 and it was less than the sPod.
The sPod will look like it came from the factory, John did a good job in getting it looking right... the ARC model I have will look like shit inside of your rig. Your call... looks or function.
#9
JK Super Freak
I have this fuse panel (The large one) with (2) 7 conductor trailer wires going behind the glovebox. this gives me 7 independently fused power and ground feeds. Most of my lights etc are integrated with factory controls and I hate extra switches.
Before the fuse box I have a circuit breaker for quick disconnect of all accessories so i don't have to pull all the fuses. The entire assembly fits perfectly on top on the fuse box cover.
Before the fuse box I have a circuit breaker for quick disconnect of all accessories so i don't have to pull all the fuses. The entire assembly fits perfectly on top on the fuse box cover.
#10
JK Enthusiast