zedteamk2

I have never chalk tested to get the correct air pressure so i would like you opinion/ advice.
I just had some Nitto Trail Grapplers installed.
The tire place put them at 35 psi, and it made the jeep very flighty and not pleasant at all.
Here they are at 28 psi.

Is this right or do i need to lower even further?
I realized the picture is a little unclear- the inner and outter 1/2 inch did not rub off, the inside parts did.

FYI- 2010 2 door

john smack

let more out until it is even.
if your wearing in the middle and not on the sides too much pressure
if your wearing the sides and not the middle thats too little pressure

DadsCJ

I agree, let out some more air till the chalk is even all the way across.