chalk test results question
#1
JK Newbie
Thread Starter
Join Date: Nov 2009
Location: Cape Coral
Posts: 94
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://www.jk-forum.com/forums/images/icons/icon1.gif)
I installed 35x1250x15 KM2s about 4000 miles ago. I've been driving them at around 25psi - based on the way they looked like they were wearing. I did a rotation and a chalk line test yesterday. Here's what they look like at 27 psi:
![](http://i639.photobucket.com/albums/uu118/wadestep/random/IMAG0256.jpg)
a thin strip of chalk left at the edges.
here's at 29 psi:
![](http://i639.photobucket.com/albums/uu118/wadestep/random/IMAG0255.jpg)
a definatly wider strip of chalk left.
How to interpret this? Is 29 too uneven? Is 27 good, or still too uneven? should I try 25?
thanks.
wade
![](http://i639.photobucket.com/albums/uu118/wadestep/random/IMAG0256.jpg)
a thin strip of chalk left at the edges.
here's at 29 psi:
![](http://i639.photobucket.com/albums/uu118/wadestep/random/IMAG0255.jpg)
a definatly wider strip of chalk left.
How to interpret this? Is 29 too uneven? Is 27 good, or still too uneven? should I try 25?
thanks.
wade
#3
JK Enthusiast
Join Date: Jun 2009
Location: EVINGTON, VA
Posts: 155
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://www.jk-forum.com/forums/images/icons/icon1.gif)
Remember you have 4000 on it already with a different psi. I have over 40000 on mine and tread is only half gone oh I run 30 psi and rotate every 3000. Give it some time and check again.