Body lift 1.25" and TC issue
#1
JK Junkie
Thread Starter
Join Date: Dec 2008
Location: New France
Posts: 2,540
Likes: 0
Received 0 Likes
on
0 Posts
Body lift 1.25" and TC issue
I installed the Rough Country Body lift 1.25" two weeks ago, and I noticed that the transfer case shifter is very hard sometime to put it in 4 lo. The Jeep was not like that before the B.L.
I removed the RC 1.25" B.L. and I installed the Performance Accessories 1" B.L. last Week-End, and the T.C. shifter issue is gone! I have no explanation, I think that at 1.25" the angle of the T.C. cable is probably too high?!?!
I removed the RC 1.25" B.L. and I installed the Performance Accessories 1" B.L. last Week-End, and the T.C. shifter issue is gone! I have no explanation, I think that at 1.25" the angle of the T.C. cable is probably too high?!?!
#2
transfer case shouldn't have moved with the body lift. Only the cable from the shifter in the cab to the tc would. Body lift should not affect the transfer case cable unless it was pinched or something before.