which axle sleeve is better ?
#33
JK Jedi
Lol i hope your learning from this thread. Sorry i didnt just draw a simple picture and a 2 page write up.. With your so called wrenching skill i thought you would have a slight clue... My mistake...
But back on topic. No aftermarket outer seals will fit, but your stock dust shield will as it slides over the axle shaft and does not go into the tube
But back on topic. No aftermarket outer seals will fit, but your stock dust shield will as it slides over the axle shaft and does not go into the tube
Last edited by Maertz; 09-08-2013 at 10:59 AM.
#34
Lol i hope your learning from this thread. Sorry i didnt just draw a simple picture and a 2 page write up.. With your so called wrenching skill i thought you would have a slight clue... My mistake...
But back on topic. No aftermarket outer seals will fit, but your stock dust shield will.
#35
JK Newbie
Thread Starter
Join Date: Sep 2012
Location: squaw valley,ca
Posts: 71
Likes: 0
Received 0 Likes
on
0 Posts
#36
You two wanna go wheeling together and practice running eachother over? I'll let you use my ride
<img src="https://www.jk-forum.com/forums/attachment.php?attachmentid=495862"/>
<img src="https://www.jk-forum.com/forums/attachment.php?attachmentid=495862"/>
if you promise to clean up the mess when you're done.
<img src="https://www.jk-forum.com/forums/attachment.php?attachmentid=495862"/>
<img src="https://www.jk-forum.com/forums/attachment.php?attachmentid=495862"/>
if you promise to clean up the mess when you're done.
#37
JK Jedi
Your loss i guess then. LOL if you have experience i never want such a thing.. Keep reading threads to become a super genius and never get opinions based off experience...