Notices
Modified JK Tech Tech related bulletin board forum regarding subjects such as suspension, tires & wheels, steering, bumpers, skid plates, drive train, cages, on-board air and other useful modifications that will help improve the performance and protection of your Jeep JK Wrangler (Rubicon, Sahara, Unlimited and X) on the trail.

PLEASE DO NOT START SHOW & TELL TYPE THREADS IN THIS FORUM

Anyone run 3/4" spacer on top of Teraflex BB?

Thread Tools
 
Old 01-06-2012 | 06:59 AM
  #1  
ALEXANDERJASON's Avatar
Thread Starter
JK Enthusiast
 
Joined: Nov 2011
Posts: 164
Likes: 0
From: AUSTIN, TX
Default Anyone run 3/4" spacer on top of Teraflex BB?

According to the install instructions, the Teraflex BB takes out 50% of the factory rake on my 2012 JKU. While i agree that it took some out, it still has more than i would like. Now i am thinking adding the 3/4" spacer may be too much??

anyone else add the daystar 3/4" to theirs?
Old 01-06-2012 | 07:10 AM
  #2  
wayoflife's Avatar
JK-Forum Founder
 
Joined: Jul 2006
Posts: 36,534
Likes: 16
From: Laguna Niguel, CA
Default

you can stack spacers up front without any problems.
Old 01-06-2012 | 08:23 AM
  #3  
ALEXANDERJASON's Avatar
Thread Starter
JK Enthusiast
 
Joined: Nov 2011
Posts: 164
Likes: 0
From: AUSTIN, TX
Default

Originally Posted by wayoflife
you can stack spacers up front without any problems.
great! any idea if the 2.5" Teraflex with a BB and adding the daystar 3/4" spacer would look weird? i'm thinking it would look like most of the coil 2.5" lifts where the front has a slightly larger gap in the wheel well than the rear. but then again, 3/4" is not very much and it still looks like the front gap is slightly smaller than the rear now - so maybe it would be pretty even.

i guess i have to wait until feb. 7th anyway to get the announcement about my new rancho shocks. that way i can put on the new shocks and daystar spacers on at the same time!!
Old 01-06-2012 | 08:39 AM
  #4  
ALEXANDERJASON's Avatar
Thread Starter
JK Enthusiast
 
Joined: Nov 2011
Posts: 164
Likes: 0
From: AUSTIN, TX
Default

one more question...

any issues with driveshaft, exhaust loop, etc adding another 3/4"?
Old 01-06-2012 | 08:44 AM
  #5  
TeraFlex's Avatar
Sponsoring Manufacturer
 
Joined: Apr 2007
Posts: 6,824
Likes: 2
From: Utah
Default

Originally Posted by ALEXANDERJASON
one more question...

any issues with driveshaft, exhaust loop, etc adding another 3/4"?
You should be fine, unless you swap shocks, then you will want the exhaust spacers.




All times are GMT -8. The time now is 01:10 PM.