is anyone else running a 35x12.50 on their stock moab wheels
#3
JK Enthusiast
Join Date: Nov 2011
Location: North Texas
Posts: 205
Likes: 0
Received 0 Likes
on
0 Posts
#6
35x12.5x17 BFG KM2s on stock wheels, 1.5 rough country wheel spacers, 3.5 rock krawler lift - I can occasionally get the inside of the tire to rub on the lower control arm at full steering lock depending on suspension compression, but just enough to feel a little vibration, not enough to bind or hurt anything.
Trending Topics
#8
JK Newbie
Join Date: Oct 2012
Location: Philadelphia, Pa
Posts: 72
Likes: 0
Received 0 Likes
on
0 Posts
Sorry for digging up an old thread, but I want to confirm for my own sanity. I'm going to mount 35x12.5x17 Nitto Trail Grapplers to a set of Moab rims. I'm going to use 1.5" spacers and have 2.5" lift. Other than regular inspections, no one has had any issues or think this is wrong or a concern? This is my daily driver and weekend trips to the mountains, so what is recommended for a good tire pressure?
#10
JK Super Freak
Join Date: May 2010
Location: georgia
Posts: 1,382
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by mtrostle
Sorry for digging up an old thread, but I want to confirm for my own sanity. I'm going to mount 35x12.5x17 Nitto Trail Grapplers to a set of Moab rims. I'm going to use 1.5" spacers and have 2.5" lift. Other than regular inspections, no one has had any issues or think this is wrong or a concern? This is my daily driver and weekend trips to the mountains, so what is recommended for a good tire pressure?