Another Teraflex BB question
#1
JK Newbie
Thread Starter
Join Date: Aug 2008
Location: sylvan lake, MI
Posts: 10
Likes: 0
Received 0 Likes
on
0 Posts
Another Teraflex BB question
Hi, I'm new to this site, and new to my 07 saraha unlimited. I've been doing some reading on here but still have a few questions. I just got the teraflex BB in the mail yesterday. I got the kit that allows me to use my stock shocks and springs, I also see it came with the rear track bar bracket. My jeep is stock and it sags in the front. I don't have plans of putting a big bumper and wench on it. After installing this lift will my jeep sit level? If not what can I do to get it to sit level? And for tires I plan on using the stock rims, and getting a 33X12.5X18 tire, will I need to purchase and install spacers? Thanks for any help.
#4
JK Super Freak
Join Date: Dec 2007
Location: WV relocated 2 Dyess AFB, TX
Posts: 1,750
Likes: 0
Received 1 Like
on
1 Post
Hi, I'm new to this site, and new to my 07 saraha unlimited. I've been doing some reading on here but still have a few questions. I just got the teraflex BB in the mail yesterday. I got the kit that allows me to use my stock shocks and springs, I also see it came with the rear track bar bracket. My jeep is stock and it sags in the front. I don't have plans of putting a big bumper and wench on it. After installing this lift will my jeep sit level? If not what can I do to get it to sit level? And for tires I plan on using the stock rims, and getting a 33X12.5X18 tire, will I need to purchase and install spacers? Thanks for any help.
http://s138.photobucket.com/albums/q.../TF%20install/
You will see that this is with spidertrax spacers on stock wheels. Without them its going to be tight.
#5
JK Newbie
Join Date: May 2008
Location: Amherst, Mass
Posts: 89
Likes: 0
Received 0 Likes
on
0 Posts
I did the TF BB and it lifts the jeep up 2-1/2" front and rear. If you had a sag before you will still have it. I ended up pulling out the front spacers and getting 3" HD front springs. I have a winch and bumper on the front and it still sits about 3/4" low. You'd probably be level without the winch and bumper weight with new springs.
Trending Topics
#8
JK Enthusiast
Join Date: Apr 2008
Location: Wiesbaden, Germany
Posts: 302
Likes: 0
Received 0 Likes
on
0 Posts
All four, and 1.25" is the minimum.
Interestingly, some steel wheels would only be a few bills more, and you can get the right backspacing, no need for spacers this route.
Interestingly, some steel wheels would only be a few bills more, and you can get the right backspacing, no need for spacers this route.
#10
Don't really know why your jeep has to sit level? When you add your lunch, beer, girls, safetly stuff ect. to the back. It will sit level. Otherwise you'll look funny dragging your tail....
Mayber I'm missing something
Mayber I'm missing something