Alloy or G2 gold axle shafts ?
06-06-2015 | 08:31 AM
#1
Thread Starter
JK Super Freak
Joined: May 2012
Posts: 1,385
Likes: 0
From: Grant Florida
The Alloys are about $100 cheaper and found them in stock about 3 hours away from my house G2 golds are American made and can be shipped here in about a week. The money is not a issue if quality is better. They are rear shafts by the way.
Last edited by JKingAround; 06-06-2015 at 08:36 AM.
06-06-2015 | 01:47 PM
#3
JK Jedi Master
Joined: Jan 2008
Posts: 11,463
Likes: 162
From: Austin <--> Colorado Springs
Go for the G2. Same warranty as TenFactory, which includes bent flanges.
Can't comment on G2 Placer vs G2 non-placer, though. Not sure what the difference is. Both are 4140.
Can't comment on G2 Placer vs G2 non-placer, though. Not sure what the difference is. Both are 4140.
06-06-2015 | 07:31 PM
#6
JK Enthusiast
Joined: Feb 2013
Posts: 287
Likes: 3
From: Littleton, Colorado
I think the G2 golds are 35 spline only?
06-06-2015 | 10:04 PM
#7
JK Junkie
Joined: Sep 2010
Posts: 2,539
Likes: 2
From: Tempe AZ
Trending Topics
06-07-2015 | 01:33 AM
#8
JK Jedi Master
Joined: Jan 2008
Posts: 11,463
Likes: 162
From: Austin <--> Colorado Springs
That's what I thought also, but their website lists 30, 32 & 35 spline rear Placer Golds for the JK.
Might just be the typical case of G2's marketing people having their heads firmly stuck up their back sides. They put out so much misinformation it's not funny...
Might just be the typical case of G2's marketing people having their heads firmly stuck up their back sides. They put out so much misinformation it's not funny...