Aftermarket Ball Joints
#1
JK Freak
Thread Starter
Join Date: Aug 2011
Location: Springfield, MO
Posts: 681
Likes: 0
Received 0 Likes
on
0 Posts
Aftermarket Ball Joints
So we've all had our run ins with death wobble, I bought a new adjustable track bar and replaced all four ball joints on my own within the last 10,000 miles. I made the mistake of buying the cheapo's from autozone and needless to say I am quite unhappy after a few days on the trails. So I want to know what you guys run as far as aftermarket adjustable ball joints. I need something that wont let me down, I think I would prefer greasable ones, and a warranty is always nice!
#2
I went with Synergy and the quality is very good. Dynatrac also makes nice ones but they are a little on the pricey side although they are rebuildable. Both should last a long time.
#4
JK Freak
Thread Starter
Join Date: Aug 2011
Location: Springfield, MO
Posts: 681
Likes: 0
Received 0 Likes
on
0 Posts
#5
JK Freak
Thread Starter
Join Date: Aug 2011
Location: Springfield, MO
Posts: 681
Likes: 0
Received 0 Likes
on
0 Posts
#6
Sponsoring Manufacturer
You can replace and rebuild the wear parts on our ball joints.
Made in the USA!!!!
Dynatrac - Confidence to ExploreŽ
Made in the USA!!!!
Dynatrac - Confidence to ExploreŽ
#7
JK Super Freak
Trending Topics
#10
JK Super Freak
Nope. It has been roughly 5000 miles since I installed my lift, 37's, and ball joints and I have had no odd wear issues. Heck about 800 miles after everything was installed I drove from Orange County, CA to Moab doing between 75 and 80mph pretty much the whole way with no issues.