Advices on ifts to go with 33inch M/T
#1
JK Enthusiast
Thread Starter
Join Date: May 2007
Location: Raincouver, Canada
Posts: 231
Likes: 0
Received 0 Likes
on
0 Posts
Advices on ifts to go with 33inch M/T
Just ordered Cooper STT and 16x8 for my 2dr, now I need your advices on which lift to get. I am thinking a lift between 2~3inch. THANK YOU!
#2
JK Junkie
Join Date: Jan 2008
Location: Long Island, NY
Posts: 2,319
Likes: 0
Received 0 Likes
on
0 Posts
Depends on what you're going to be using your rig for. If you're just mall crawling, stay stock, it won't rub. If you're going to wheel it, then a budget boost would be just fine. TeraFlex, Rubicon Express or Full Traction make decent budget boost kits.
#5
JK Freak
Join Date: Dec 2007
Location: Portland, OR - Eastside
Posts: 950
Likes: 0
Received 0 Likes
on
0 Posts
x2: if you are going to run 33s a 2 or 2.5" BB will be fine.
Trending Topics
#8
JK Newbie
Join Date: Feb 2008
Location: Rocky Mountain High
Posts: 9
Likes: 0
Received 0 Likes
on
0 Posts
I'll let you know for certain after I get back from Moab. I dont have a lift with
33's right now, and it seems fine from the steep snow hill I climbed up on the other day to test it.
Of course at full flex up on the rocks it might be different.....we'll see. I figure I might need a 1 inch body lift at the most. I dont want any more lift than I truly need. I like to keep the center of gravity as low as possible.
33's right now, and it seems fine from the steep snow hill I climbed up on the other day to test it.
Of course at full flex up on the rocks it might be different.....we'll see. I figure I might need a 1 inch body lift at the most. I dont want any more lift than I truly need. I like to keep the center of gravity as low as possible.
#10
JK Super Freak
Join Date: Nov 2007
Location: Rhode Island
Posts: 1,595
Likes: 0
Received 0 Likes
on
0 Posts
I can get my 33's to rub a little with no lift. But... the truck was twisted to the point where 1 wheel was over a foot off the ground. And it was only a little rear fender well plastic contact. A little spacer on the bump stop would solve it completly. If I had know there was that much room in those fenders I would have bought the 35's.