4" rough country lift on 2012 or 13 exhaust mod? Also only 07-11 driveshaft extention
11-14-2012 | 10:36 AM
#1
Thread Starter
JK Enthusiast
Joined: Feb 2009
Posts: 195
Likes: 0
From: WA
4" rough country lift on 2012 or 13 exhaust mod? Also only 07-11 driveshaft extention
Hey guys some questions before I tackle this lift install for anyone who has done this before !
The rough country website says 2012 jks require an exhaust mod for the 4" lift ?
Also mentions you don't need a driveshaft extension ? http://www.roughcountry.com/jeep_jk_4.html
Has anybody installed this lift on a 2012 ? I was gonna purchase it new in box from a local guy
The rough country website says 2012 jks require an exhaust mod for the 4" lift ?
Also mentions you don't need a driveshaft extension ? http://www.roughcountry.com/jeep_jk_4.html
Has anybody installed this lift on a 2012 ? I was gonna purchase it new in box from a local guy
11-14-2012 | 11:36 AM
#3
Thread Starter
JK Enthusiast
Joined: Feb 2009
Posts: 195
Likes: 0
From: WA
Originally Posted by danh63
The exhaust mod if it is like the one for my teraflex is just putting extensions in by the collectors
Sent from my DROID RAZR using Tapatalk 2
Sent from my DROID RAZR using Tapatalk 2
11-14-2012 | 12:31 PM
#5
JK Enthusiast
Joined: Jun 2012
Posts: 336
Likes: 0
From: Pittsburgh, PA
just some FYI, i put the rough country 4" lift on my buddies 2dr. rough country sent the kit for a 4dr, but he didnt want to put his jeep back together when we found out. so i installed it and it turned out to be a 5" lift. we didnt use the exhaust extensions and his drive shaft boot has roughly 1.5" of clearance, however if he were to disconnect then he would tear his boot. so for now he just stays connected
11-14-2012 | 03:42 PM
#6
Thread Starter
JK Enthusiast
Joined: Feb 2009
Posts: 195
Likes: 0
From: WA
Originally Posted by RavenZ33
just some FYI, i put the rough country 4" lift on my buddies 2dr. rough country sent the kit for a 4dr, but he didnt want to put his jeep back together when we found out. so i installed it and it turned out to be a 5" lift. we didnt use the exhaust extensions and his drive shaft boot has roughly 1.5" of clearance, however if he were to disconnect then he would tear his boot. so for now he just stays connected