4.75 Backspacing on a 37" tires
08-03-2012, 05:15 PM
#14
Originally Posted by 0llll0
It's funny that aev wheels have a 5.2" backspacing and they say that you can run 37's without issues. 
08-04-2012, 10:48 AM
#15
JK Enthusiast
Thread Starter
Join Date: May 2012
Location: Chandler, AZ
Posts: 168
Likes: 0
Received 0 Likes
on
0 Posts
First off your mounting these tires with zero lift and stock flares?
Secondly, yes they will rub like a mofo. I currently have 37x12.5 tires, 3.5" lift and 4.75" BS wheels and they rubbed bad on the lower control arms and sway bar. Fixed all this with Spydertrax 1.5" wheel spacers. I'm now at 3.25" BS
Secondly, yes they will rub like a mofo. I currently have 37x12.5 tires, 3.5" lift and 4.75" BS wheels and they rubbed bad on the lower control arms and sway bar. Fixed all this with Spydertrax 1.5" wheel spacers. I'm now at 3.25" BS
As for the fenders, well they arent an issue any longer. I went out and pulled them completely off last night. Took a angle grinder to the pinch seam and to the front bumper. While I was at it, I took off the welded fender support.
Was a queasy feeling doing this to a vehicle that I just finished making my first payment on.
Dropped it off at Discount Tire this morning for mounting.
Hope to have pics soon.
08-04-2012, 12:33 PM
#16
Zero lift!... Until the lift comes in.
As for the fenders, well they arent an issue any longer. I went out and pulled them completely off last night. Took a angle grinder to the pinch seam and to the front bumper. While I was at it, I took off the welded fender support.
Was a queasy feeling doing this to a vehicle that I just finished making my first payment on.
Dropped it off at Discount Tire this morning for mounting.
Hope to have pics soon.
As for the fenders, well they arent an issue any longer. I went out and pulled them completely off last night. Took a angle grinder to the pinch seam and to the front bumper. While I was at it, I took off the welded fender support.
Was a queasy feeling doing this to a vehicle that I just finished making my first payment on.
Dropped it off at Discount Tire this morning for mounting.
Hope to have pics soon.
08-04-2012, 01:28 PM
#17
JK Enthusiast
Join Date: Sep 2011
Location: Boca Raton, Florida
Posts: 384
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by hypeiv
lol... can't wait to see pics of a stock height JK with no fenders and 37s
08-04-2012, 03:10 PM
#19
JK Freak
Join Date: Jun 2011
Location: Clearwater, Florida
Posts: 693
Likes: 0
Received 0 Likes
on
0 Posts
I had my Pintlers on 37" KM2's and they rubbed at full turn so not sure how yours isnt. I sold the AEV's and with the Spyderlocks alone they didnt rub do to the 3.5" BS. My new wheels are Pro Comps and they rubbed so threw on some spacers.
08-04-2012, 05:51 PM
#20
Originally Posted by hagausaf
I had my Pintlers on 37" KM2's and they rubbed at full turn so not sure how yours isnt. I sold the AEV's and with the Spyderlocks alone they didnt rub do to the 3.5" BS. My new wheels are Pro Comps and they rubbed so threw on some spacers.