4.1 stroker? Who's done it? Pros vs cons
#161
JK Enthusiast
#164
Did you ever get that figured out? I am looking at one of those motors now but not supercharged. My 3.8 is at about 105K and I am thinking it might be a good time to change it here in the very near future. Looking at all types of options from O'rielly remaned for only 2k to this stroker. I would love a Hemi but that type of money just isnt in my budget at the moment. Maybe once it is paid off in a few more months...I think it will be about 12.
#165
JK Enthusiast
Join Date: Dec 2012
Location: Denver, CO
Posts: 196
Likes: 0
Received 0 Likes
on
0 Posts
Bumpity bump.. Anything new?
My engine has 155k. Still runs fine, but looking for more power under $7k.
I'm in CO, and would drive it to 505 and come back when done.
My engine has 155k. Still runs fine, but looking for more power under $7k.
I'm in CO, and would drive it to 505 and come back when done.
#166
anyone try the 505 with a sprintex yet?
following this as well.
Im running a sprintex SC and was looking at 505 performance stroker... was advised to not run a SC with the 4.1 because it works the SC very hard according to them with minimal boost? could this be adjusted by just swapping the pully? Or would you need to bore the SC as well ?
I see most people are running the RIPP and despite them being different styles of SC, boost is boost so if its running well on a ripp i might give it a go with my sprintex
Im running a sprintex SC and was looking at 505 performance stroker... was advised to not run a SC with the 4.1 because it works the SC very hard according to them with minimal boost? could this be adjusted by just swapping the pully? Or would you need to bore the SC as well ?
I see most people are running the RIPP and despite them being different styles of SC, boost is boost so if its running well on a ripp i might give it a go with my sprintex
#167
Maybe I missed it, has anyone tried one of the 4.1 stroker 505 engines in a stock, un-blown setup? I'm looking for a little more grunt for hauling my 2900 lb travel trailer and this looks like it may be an affordable option.
Thanks!
Thanks!
#168
Building A Stroked Jeep 3.8L V6 - JK Bumping
#169
4.1 stroker
Very interested in hearing any response from someone who has went this route as well.
#170
Your welcome to PM me for more details if you want.