38x14.50?
04-23-2010, 07:19 AM
#12
JK Enthusiast
Thread Starter
Join Date: Sep 2007
Location: El Paso, TX.
Posts: 131
Likes: 0
Received 0 Likes
on
0 Posts
so run these; http://www.northridge4x4.com/proddet...SPIDER-WHS-010 and i should be good to go? i have already trimmed the rear seam and have a hanson stubby up front. i will also be adding gussets in the front.
Last edited by alz06; 04-23-2010 at 07:24 AM.
04-23-2010, 08:28 AM
#13
JK Jedi Master
I run 1.5in wheel spacers on 17x8 rims with 4.5 bs. Toyos 37x1350x17. It will still rub the frame at full lock and flexed. Just a tiny bit though and I've never adjusted the steering stops though, it's really not bad enough for me to worry about. As wol said, 13.50's will still rub with your current rims.
04-23-2010, 08:46 AM
#14
JK Enthusiast
Thread Starter
Join Date: Sep 2007
Location: El Paso, TX.
Posts: 131
Likes: 0
Received 0 Likes
on
0 Posts
I run 1.5in wheel spacers on 17x8 rims with 4.5 bs. Toyos 37x1350x17. It will still rub the frame at full lock and flexed. Just a tiny bit though and I've never adjusted the steering stops though, it's really not bad enough for me to worry about. As wol said, 13.50's will still rub with your current rims.
well that good news considering they are roughly the same size tire. KM2 height is 37.52 Toyo is 37, KM2 sectional width is 14.7 Toyo is 14.6
