Wildman

Hello everyone,
I'm a new Jeep owner and new to the site. I would like to start my mods with wheels and tires on my 2007 four door Rubicon. I would like to put black cragar wheels and 35" tires on first, then do suspension lift later. Can I get the 35 x 12.5-17 to work (temporarily)? If so, what wheel diamentions will I need?
Thanks

Yoda

With no lift, it will work, but it will rub at full flex

Wildman

Thanks, it will be temporary so I'm not too worried about it. Any recomendations on 17" or 16" wheel and other wheel diamentions of importance?

greenamphibious

you'll need to chop your flares. You can use some 15" and up diameter but 16" and up is recomended

Wildman

What about wheel width and back spacing etc for a 35x21.50-16 or17??

Wildman

typo---35x12.5-16 or 17

greenamphibious

at least 4.5" bsp and at least 8" wide wheel

Wildman

Thanks for your help. I'm sure I will have lots more questions as time goes on and I start breaking things.

mkjeep

It'll rub hitting a bump in the road with no trimmimng and stock flares.