Notices
Modified JK Tech Tech related bulletin board forum regarding subjects such as suspension, tires & wheels, steering, bumpers, skid plates, drive train, cages, on-board air and other useful modifications that will help improve the performance and protection of your Jeep JK Wrangler (Rubicon, Sahara, Unlimited and X) on the trail.

PLEASE DO NOT START SHOW & TELL TYPE THREADS IN THIS FORUM

3 1/2" Lift, Stock Front Drive Shaft?

Thread Tools
 
Old 01-13-2013 | 04:23 PM
  #1  
13-JKU-Freedom's Avatar
Thread Starter
JK Newbie
 
Joined: Jan 2013
Posts: 41
Likes: 0
From: Salt lake city, UT
Default 3 1/2" Lift, Stock Front Drive Shaft?

How many of you are running a 3 1/2" or larger lift on a unlimited auto trans and are running the stock front drive shaft?
Old 01-13-2013 | 06:42 PM
  #2  
greensouth's Avatar
JK Newbie
 
Joined: Nov 2011
Posts: 31
Likes: 0
From: Tallahassee , Fl
Default

I run a 3.5 RC lift on a 2009 and 2013 JKU with no driveshaft issues. I bought exhaust spacers but haven't installed on my 2013 yet.
Old 01-13-2013 | 06:50 PM
  #3  
Fugg it's Avatar
JK Super Freak
 
Joined: Oct 2012
Posts: 1,007
Likes: 0
From: Cali
Default

4" pro comp, auto 4 dr ..... No problems
Old 01-13-2013 | 06:53 PM
  #4  
13-JKU-Freedom's Avatar
Thread Starter
JK Newbie
 
Joined: Jan 2013
Posts: 41
Likes: 0
From: Salt lake city, UT
Default

So stock front drive shaft, are you running any exhaust spacers?
Old 01-13-2013 | 06:59 PM
  #5  
JohnnyQuik's Avatar
JK Freak
 
Joined: Jan 2011
Posts: 803
Likes: 0
From: Charleston, SC
Default

I ran the stock front on my 2011 for 40k miles with a 3" FT lift that measured closer to 4". The spline boot was gone after the first wheeling trip, but the shaft never failed and I wheeled on some pretty tough trails. The 2012+ seem to have a worse angle though, so I'm not sure how long you can run the stock shaft.




All times are GMT -8. The time now is 12:26 AM.