2014 JK Idle Speed - ECM gurus inside.
#1
JK Newbie
Thread Starter
Join Date: May 2014
Location: Omaha, NE
Posts: 66
Likes: 0
Received 0 Likes
on
0 Posts
2014 JK Idle Speed - ECM gurus inside.
I'm currently running a Superchips Flashcal and I've been mulling over purchasing the flashpaq tuning for my 2014 Rubicon with manual trans. I would gain the crawl tune, which I understand changes the drive-by-wire scaling in the ECM. That would be beneficial, but I think it would be even more beneficial to be able to idle up the engine to 1000-1100 rpm. I can adjust the idle with the Flashcal, but only with the flashcal plugged in. What a PITA.
What's the 'path of least resistance' to changing DBW scaling and idle speed? Is there an HPtuners program or something similar for the Mopar ECM? I don't care a bit about changing the fuel and ignition calibration.
What's the 'path of least resistance' to changing DBW scaling and idle speed? Is there an HPtuners program or something similar for the Mopar ECM? I don't care a bit about changing the fuel and ignition calibration.