2 door stretch
#6
When I started my stretch I just reused my buddy's old coil mounts and plug welded them to a plate with a hole drilled in it and mounted them over the body mounts. I'm going with outboard coilovers though so not using this setup anymore. Was a decent idea though...
Last edited by MOKOS; 03-02-2014 at 08:41 PM.
#7
JK Newbie
Thread Starter
Join Date: May 2012
Location: quebec
Posts: 13
Likes: 0
Received 0 Likes
on
0 Posts
Thanks it look awesome!! But do you think I better wait to do it with coilover the first time ?
Trending Topics
#8
JK Jedi
not a jk but hes on coils/shock stretching the crap out of them.
Last edited by Maertz; 03-03-2014 at 04:55 PM.
#9
JK Newbie
Thread Starter
Join Date: May 2012
Location: quebec
Posts: 13
Likes: 0
Received 0 Likes
on
0 Posts
much easier approach that way. i did a small stretch and coils and am now redoing it after a few months of it. with coils it can be a pain to keep the lift low and also run long travel shocks properly. you can retain them and stretch the crap out of them if you want though...also if you ever decided to go coilover its alot to cut off and redo, but you may be able to reuse some of the stuff. cost is the main reason to go that route, but if you have the money personally id go coilover. that being said plenty of people do run the coils/shock setups no problem.
not a jk but hes on coils/shock stretching the crap out of them.
not a jk but hes on coils/shock stretching the crap out of them.
#10
Former Vendor
RK