Transmission Cooler
#231
I just had my shop install a B&M cooler and they spliced into the lower hose instead of the top. Is this a big deal since they already did it? All that means is that the A/M cooler is cooling the fluid before it goes to the factory cooler right????
#232
JK Newbie
Join Date: Jun 2010
Location: Houston, Texas
Posts: 57
Likes: 0
Received 0 Likes
on
0 Posts
Hey guys sorry for the noob question, but is this the hose barb adapter I should be getting to connect the two hose ends?
http://www.lowes.com/pd_27971-104-A-...133633&Ntt=3/8
http://www.lowes.com/pd_27971-104-A-...133633&Ntt=3/8
#233
JK Super Freak
Hey guys sorry for the noob question, but is this the hose barb adapter I should be getting to connect the two hose ends?
http://www.lowes.com/pd_27971-104-A-...133633&Ntt=3/8
http://www.lowes.com/pd_27971-104-A-...133633&Ntt=3/8
#234
JK Enthusiast
Join Date: Feb 2009
Location: Mechanicsville, MD
Posts: 155
Likes: 0
Received 0 Likes
on
0 Posts
http://home.comcast.net/~kingslea1/Jeep/Tranny.pdf
Last edited by redrunner; 07-10-2010 at 04:10 AM.
#238
I have a few Q's for everyone....
1. those of you without the aux fan can you give an update?
2. those of you with larger coolers are you running into any shifting problems?
3. does anyone make in line temp sensors....i would like to do "IN/OUT" temps
TIA!!!
#240
JK Enthusiast
Join Date: Sep 2009
Location: Virginia Beach, VA
Posts: 487
Likes: 0
Received 0 Likes
on
0 Posts
This is on my short list of my next mod. Is there anything that someone might really screw up when doing this mod. I am not too brave when it comes to a engine/tranny mod. Any words of wisdom for us non-mechanics.