ignatius504

Look up jeep swag or Brett Woods on here. They have clips that are suppose to be perfect!

Hoosierdaddy03

Wish I was at home, I have a box full plus the #. I can tell you it's ALOT cheaper online than dealership. Dealership 7$ a clip, online 10$ for 20.

JAM85

cool let me know. I got the clips that hold the fender to the body just looking for the plastic clips that push in to hold the inner fender in place. Thanks.

disheveledhair

Did anyone ever replace those plastic clips with bolts? If so, what size did you guys use? Those clips are annoying and break too easily.

Goodie

Sometimes the plastic fasteners are intentional week points, allowing parts to break away causing less damage. Don't see how that would be the case with inner fenders but something to think of.

Ruby Tuesday

I have a question, and sorry if it's been covered in earlyer posts (680 of them) I've been looking at bushwacker flats but this is a cheaper option, if I do this mod and then decide to go with the BW later will the inner fenders still work with the BW? Or are they ruined at this point. Thanks for any input

catahoula

You might want to download install directions because i don't think you use those. I could be wrong.

rb1boxer_3

Just used a dremel and a cutting bit and wheel. Did mine and a friends in lk 2 hrs.

Mjkrakow

if you cut the inner fenders to match the bushwacker install, it will work fine. that s how i did mine. just follow the contour of the body when cutting them.

Towmator

finally went through with it. During the chop, after it was all said and done