Notices
JK Write-Ups Bulletin board forum regarding useful installation write-ups, budget fixes and homemade solutions for the Jeep JK Wrangler (Rubicon, Sahara, Unlimited and X).

Drilled the side view mirrors!

Thread Tools
 
Old 02-21-2007 | 10:59 AM
  #61  
PeterBateman's Avatar
JK Enthusiast
 
Joined: Feb 2007
Posts: 123
Likes: 0
Default

I drilled, but nothing came out. Its still cold here, so I'm hoping thats just it...I drill though the plastic, then space, then I hit something (didnt drill into that, I was careful)...

did others 'hit' something with your drill bit? or did I not drill in the right spot...trust me, I've used a drill before...
Old 02-21-2007 | 01:54 PM
  #62  
redWRANGLER's Avatar
JK Freak
 
Joined: Jan 2007
Posts: 716
Likes: 0
From: Long Island, NY
Default

Has anyone slipped and scratched their paint yet?
Old 02-21-2007 | 02:57 PM
  #63  
RubiconCheck's Avatar
JK Newbie
 
Joined: Nov 2006
Posts: 29
Likes: 0
From: Canada
Default

After drilling mine, I thought what a waste of time it was bringing the drill out. I should've just brought out a pencil and jabbed it through the mirror housing. Soft plastic everywhere.
Old 02-21-2007 | 04:09 PM
  #64  
fathomgreencamaro's Avatar
JK Freak
 
Joined: Dec 2006
Posts: 512
Likes: 0
Default No more streaked doors after car wash

I drilled mine today. Just after a car wash. Works great.

I drilled a little lower, about 1/8" abover the inner ring.
Figured I could get away with that because of the upward angle.
I steadied myself with my left hand on the upper door hinge.
Kind've like lining up a pool shot. Easy to control the depth
this way.

I made the hole a little right of center on the driver's side,
and a little left of center on the passenger side.
This was indicated by the stream of water dripping down
between the mirror mount and the door. Seemed like
that was the low spot for maximum drainage.

This was quick and easy and I am NOT as mechanically
inclined as most guys on here.

Thank you Rubimon!
Old 02-21-2007 | 06:09 PM
  #65  
Rubimon's Avatar
Thread Starter
JK Jedi
 
Joined: Sep 2006
Posts: 5,567
Likes: 1
From: So. Cal.
Default

Originally Posted by PeterBateman
I drilled, but nothing came out. Its still cold here, so I'm hoping thats just it...I drill though the plastic, then space, then I hit something (didnt drill into that, I was careful)...

did others 'hit' something with your drill bit? or did I not drill in the right spot...trust me, I've used a drill before...
Just pour some water in your mirror and see if it comes out. Also, it takes literally 2 minutes to take the mirror off from the inside of the door. Two torx screws. Thats the best way to tell what you have done if you're worried.
Old 02-21-2007 | 06:15 PM
  #66  
Rubimon's Avatar
Thread Starter
JK Jedi
 
Joined: Sep 2006
Posts: 5,567
Likes: 1
From: So. Cal.
Default

Originally Posted by fathomgreencamaro
Thank you Rubimon!
You are quite welcome. Glad I could be part of such an intense mod!

It felt good didn't it! Now you're thinking where else can I drill something? I have had my eye on those 7 little plastic troughs below the grill that I have to splash the water out of when I clean my Jeep. Tempting, tempting.
Old 02-21-2007 | 06:32 PM
  #67  
PeterBateman's Avatar
JK Enthusiast
 
Joined: Feb 2007
Posts: 123
Likes: 0
Default

Originally Posted by Rubimon
Just pour some water in your mirror and see if it comes out. Also, it takes literally 2 minutes to take the mirror off from the inside of the door. Two torx screws. Thats the best way to tell what you have done if you're worried.
ok thanks ill do that.
Old 02-21-2007 | 09:47 PM
  #68  
kaffeene's Avatar
JK Enthusiast
 
Joined: Feb 2007
Posts: 347
Likes: 2
From: North Jersey
Default

Originally Posted by MJS_Jeep_888

Question, though: Have you experienced any sort of whistling from the drill hole at speed (highway)?
It lets bambi know your coming down the road and to not jump in front of you.



So I think when I finally get a JK I'll just go to the dealer with a Dewalt & 3/32 bit so as soon as I'm done signing I can go out and drill my mirrors..... you know, so I can be sure I never get water in my doors by doing this mod early.
And to see the reaction of the salesman.



Originally Posted by 2K1TJ
Wow, over 6 pages and almost 4000 viewings on a thread about drilling a couple tiny holes in a piece of plastic!!
I just started page 8

Last edited by kaffeene; 02-21-2007 at 09:59 PM.
Old 02-22-2007 | 07:20 AM
  #69  
Piginajeep's Avatar
JK Jedi Master
 
Joined: Oct 2006
Posts: 15,133
Likes: 0
From: O HI 4 Lo
Default

Please stay on topic, which reminds me, I need to go drill my mirrors..
Old 03-03-2007 | 08:30 PM
  #70  
Rubimon's Avatar
Thread Starter
JK Jedi
 
Joined: Sep 2006
Posts: 5,567
Likes: 1
From: So. Cal.
Default

I see a boatload of people getting their Jeeps. This is a must first mod!


Quick Reply: Drilled the side view mirrors!



All times are GMT -8. The time now is 09:30 PM.