Wheels, Rubicon 44s, and two sets of spacers
07-31-2014 | 02:30 PM
#1
Thread Starter
JK Newbie
Joined: Oct 2011
Posts: 81
Likes: 2
From: Houston, TEXAS
I have new pro comp 7069s with maybe 40 miles on them. 120 obo each.
I have some new 2 inch wheel spaces, 100 for set of 4.
I have a set of 1.5 wheel spacers 2 of which are spidertrax 75 for set. They are re used in good condition.
I'm trying to post photos, never done it before on here, see if it works! Sorry I couldn't get better pics of the front end with all the steering. I'll get some better photos when the axles are out from under the jeep if I don't have a buyer by then.
I need local pick up for the axles and wheels. The wheel spacers i will ship anywhere in the lower 48 for 10 bucks.
I have some new 2 inch wheel spaces, 100 for set of 4.
I have a set of 1.5 wheel spacers 2 of which are spidertrax 75 for set. They are re used in good condition.
I'm trying to post photos, never done it before on here, see if it works! Sorry I couldn't get better pics of the front end with all the steering. I'll get some better photos when the axles are out from under the jeep if I don't have a buyer by then.
I need local pick up for the axles and wheels. The wheel spacers i will ship anywhere in the lower 48 for 10 bucks.
Last edited by RECTEX; 08-14-2014 at 05:51 AM.
07-31-2014 | 10:36 PM
#2
JK Newbie
Joined: Jun 2013
Posts: 88
Likes: 0
From: Orange County
Hey guys, I am going to throw some Solid 60s under my rig very soon, basically whenever the 60s arrive, and I have a few things associated with the 44s that are for including the assemblies of course. I have a few different items and wanted to list them all in the same thread for convenience. Now keep in mind that these items with the exception of the drive shafts wont be available to you until the 60s and new wheels get mounted up. So, be prepared to wait a little while if need be. I'm going to try and make this transition as quick as possible but bear with me.
OK the Rubicon 44s from my 08 have stock lockers, 5.38 gears and the front has sleeves and C gussets. I have the old stock yokes for them if you want them, otherwise I have 1310 yokes you can have with them. They run smooth and were treated well. They will bother be including brake rotors. The rear has a Rancho diff cover in red. I
OK the Rubicon 44s from my 08 have stock lockers, 5.38 gears and the front has sleeves and C gussets. I have the old stock yokes for them if you want them, otherwise I have 1310 yokes you can have with them. They run smooth and were treated well. They will bother be including brake rotors. The rear has a Rancho diff cover in red. I
08-02-2014 | 02:10 PM
#4
Thread Starter
JK Newbie
Joined: Oct 2011
Posts: 81
Likes: 2
From: Houston, TEXAS
Trending Topics
08-02-2014 | 06:21 PM
#8
Thread Starter
JK Newbie
Joined: Oct 2011
Posts: 81
Likes: 2
From: Houston, TEXAS
Thanks, I think the pricing is fair from what I have seen. Not trying to get rich but the cost of the Solid front and rear has put a dent in my finances for sure. Just need to recoup a little.
