Tube Bumper Solution?
#1
JK Newbie
Thread Starter
Join Date: Sep 2016
Location: Connecticut
Posts: 46
Likes: 0
Received 0 Likes
on
0 Posts
Tube Bumper Solution?
Haven't had the Wrangler two weeks, and the wife puts a good size dent in the front bumper, nailing a fence! I kept my cool, but my insides were SCREAMING!!
Anyway, that's a good excuse for getting rid of the milk jug bumper (which I hate anyway) and putting a tube bumper on the front, like I did with my 2008.
Problem: the existing bumper has fog lights encorporated into the front bumper. If I buy an aftermarket tube bumper, I'm assuming that I will have to extend the wires for the fog lights, and buy some sort of brackets for them, to mount them independently on the new tube bumper, right?
What is the easiest solution?
Anyway, that's a good excuse for getting rid of the milk jug bumper (which I hate anyway) and putting a tube bumper on the front, like I did with my 2008.
Problem: the existing bumper has fog lights encorporated into the front bumper. If I buy an aftermarket tube bumper, I'm assuming that I will have to extend the wires for the fog lights, and buy some sort of brackets for them, to mount them independently on the new tube bumper, right?
What is the easiest solution?
#2
JK Super Freak
Haven't had the Wrangler two weeks, and the wife puts a good size dent in the front bumper, nailing a fence! I kept my cool, but my insides were SCREAMING!!
Anyway, that's a good excuse for getting rid of the milk jug bumper (which I hate anyway) and putting a tube bumper on the front, like I did with my 2008.
Problem: the existing bumper has fog lights encorporated into the front bumper. If I buy an aftermarket tube bumper, I'm assuming that I will have to extend the wires for the fog lights, and buy some sort of brackets for them, to mount them independently on the new tube bumper, right?
What is the easiest solution?
Anyway, that's a good excuse for getting rid of the milk jug bumper (which I hate anyway) and putting a tube bumper on the front, like I did with my 2008.
Problem: the existing bumper has fog lights encorporated into the front bumper. If I buy an aftermarket tube bumper, I'm assuming that I will have to extend the wires for the fog lights, and buy some sort of brackets for them, to mount them independently on the new tube bumper, right?
What is the easiest solution?
#3
Super Moderator
Rampage appears to have one that would work without modification to your current harness and fits your double tube desires.
#4
JK Newbie
Thread Starter
Join Date: Sep 2016
Location: Connecticut
Posts: 46
Likes: 0
Received 0 Likes
on
0 Posts
Not long ago, I had purchased a Jeep Cover and a Spare Tire Cover from Extreme Terrain. I found a Front Bumper with OEM Fog Light locations, and ordered it today.
Last edited by Soupy1957; 09-23-2016 at 02:22 AM.
#5
JK Newbie
Thread Starter
Join Date: Sep 2016
Location: Connecticut
Posts: 46
Likes: 0
Received 0 Likes
on
0 Posts
Been re-remembering the bumper removal process and am a bit concerned about doing the fog lights correctly, and getting the hold down plugs out of the splash guard strip behind the existing bumper, already the philips head is slipping, and I've resolved to drilling holes in the center of those plugs, but THEN what? Once the holes are there, what's the value? How do I grab and remove them after that? Stick something down that hole to remove them? What? An "easy out?
#6
Super Moderator
The value on the stock bumper is next to nothing in most places, I wouldn't worry about damaging the stock bumper in any way.
Trending Topics
#8
JK Newbie
Thread Starter
Join Date: Sep 2016
Location: Connecticut
Posts: 46
Likes: 0
Received 0 Likes
on
0 Posts