Sill Kit
#1
JK Enthusiast
Thread Starter
Join Date: Dec 2008
Location: Kentucky
Posts: 237
Likes: 0
Received 0 Likes
on
0 Posts
Sill Kit
Getting ready to place a small order with Quadrated or 4WD and was wondering if anyone has put these on and if so does the tape hold them on good?
http://www.quadratec.com/products/13113_202.htm
http://www.quadratec.com/products/13113_202.htm
#2
JK Super Freak
I got the powder coated SS ones from Rugged Ridge. the tape holds very well, just be sure and clean the area very well I used laquer thinner, but alcohol or any other surface prep should work. make sure that they are in the position you want them, they are a bitch to get back off
#6
JK Enthusiast
Join Date: Mar 2008
Location: Nacogdoches, TX
Posts: 317
Likes: 0
Received 0 Likes
on
0 Posts
I put the same ones on about 2 months ago and so far I haven't had any problems. With anything else that has tape, just make sure the area is clean and dry before you put them on. They makes a great difference in looks on the door sill.
#7
JK Enthusiast
Join Date: Aug 2008
Location: Farmington, Ct
Posts: 374
Likes: 0
Received 0 Likes
on
0 Posts
I've had them on for almost 4 months now.
Not to repeat what others have already said, I agree with all above.
I liked the fact that they gave more coverage on the front door sills
than others available. I have them front and rear w/ 4dr.
Not to repeat what others have already said, I agree with all above.
I liked the fact that they gave more coverage on the front door sills
than others available. I have them front and rear w/ 4dr.
Trending Topics
#9
JK Enthusiast
Join Date: Dec 2008
Location: Atlanta area
Posts: 248
Likes: 0
Received 0 Likes
on
0 Posts
+1 to the others, these were one of the first mods I added to my Jeep.
Mine came with two alcohol prep pads (four-door). Just be sure to thoroughly clean the area and then press down hard once you've put them in place. should be fine.
Mine came with two alcohol prep pads (four-door). Just be sure to thoroughly clean the area and then press down hard once you've put them in place. should be fine.
#10
Getting ready to place a small order with Quadrated or 4WD and was wondering if anyone has put these on and if so does the tape hold them on good?
http://www.quadratec.com/products/13113_202.htm
http://www.quadratec.com/products/13113_202.htm